Another (different) Baby Pac Man issue - please help!

dmieczko

Active member
Joined
Nov 14, 2011
Messages
401
Reaction score
36
Location
Woodbury, Connecticut
Another (different) Baby Pac Man issue - please help!

I have a Baby Pac with a few glitches, and I am going to be replacing connectors & pins soon. Another problem came up, and I can't tell if it's another problem related to the connectors, or if there is something in one of the contacts I am missing.

During pinball mode, when the ball in the upper U-shape gets sent to the right hand side, the solenoid that pops up the drop target goes off over and over again, every couple seconds, until I either hit the ball back to the left hand side of the channel, or shut off the machine. I looked very closely at the bottom of the playfield and the drop target assembly, and I don't see anything out of place or disconnected.

Just curious if anyone has seen that before, and if this is another communication error between boards (which is why I am replacing all the connectors soon), or if this could be another problem I am missing in my inspection..... Thanks again for any help!

Dave
 
Back
Top Bottom