Another 1979 Bally Star Trek problem

zukesofhazzard

New member
Joined
Dec 8, 2010
Messages
83
Reaction score
0
Location
California
Everything works great on this thing except for every once in a while the flippers go dead! Both of them, wait a little while, you can hear the relay click then they are operational again. Sometimes they go dead for a few seconds, sometimes close to a minute, what gives???
 
Relay on the solenoid driver is starting to fail, OR, you have cracked solder joints to the connector pins on the solenoid driver board. Pull your board and check them/reflow if necessary. Good luck.

Chris
 
Back
Top Bottom