I got a 20 pack from my local Costco and had a few more laying around. Any office supply store or Target will have a good selection. Stay away from "washable" pens...they will not work. I tried some because they had colors that I thought would match but the ink is like water.
Andys80s EDOT Adventure
- Thread starter andys80s
- Start date
I got a 20 pack from my local Costco and had a few more laying around. Any office supply store or Target will have a good selection. Stay away from "washable" pens...they will not work. I tried some because they had colors that I thought would match but the ink is like water.
My coin door inserts were finished today....
Have a look!
http://forums.arcade-museum.com/showthread.php?t=154846
Oh and I got the wheels spinning on the EDOT floor and cpo!
Have a look!
http://forums.arcade-museum.com/showthread.php?t=154846
Oh and I got the wheels spinning on the EDOT floor and cpo!
Last edited:
Talon2000
Well-known member
According to the sharpie website 39 colors in the fine point.
http://www.sharpie.com/enUS/Product...arpieFinePointPermanentMarker(Sharpie Catalog)
Alright! That's what I really need!
Hey when you get a sec can you post a few pics of your EDOT?
Nevus
Member
My coin door inserts were finished today....
Have a look!
http://forums.arcade-museum.com/showthread.php?t=154846
Oh and I got the wheels spinning on the EDOT floor and cpo!
Please explain, I'm going to need all of this stuff in a few weeks.
Superully
Active member
the biggest pack i can find includes 24 colors - do i have to buy the other colors individually?
KevinMullins
Active member
Looking forward to seeing how this turns out.
The coin door inserts look awesome by the way.
Been a bit preoccupied lately....
I did change the big blue in my SW today....and no more HUMM! Love this board
Here are some photos I took at DCA
http://s1088.photobucket.com/albums/i327/andysedot/ElecTRONica/
Gonna try to get back Sun night so I can get in...ElecTRONica is only on Fri, Sat, and Sun nights. I don't know why they just can't have the arcade open everyday??
I did change the big blue in my SW today....and no more HUMM! Love this board
Here are some photos I took at DCA
http://s1088.photobucket.com/albums/i327/andysedot/ElecTRONica/
Gonna try to get back Sun night so I can get in...ElecTRONica is only on Fri, Sat, and Sun nights. I don't know why they just can't have the arcade open everyday??
Last edited:
Due to all the EDOTs turning up around here lately I felt I better get going!
All I have got done in the last few weeks is getting the left inside of the cab striped of the spray painted over vinyl...oh and the floor too!
I have also started to re-glue and counter sink screws in all the supports.
What a pain in the ass! The right side came off like it was an avery label....the left...oh NO...came off an inch at a time even with the heat gun.
All I have got done in the last few weeks is getting the left inside of the cab striped of the spray painted over vinyl...oh and the floor too!
I have also started to re-glue and counter sink screws in all the supports.
What a pain in the ass! The right side came off like it was an avery label....the left...oh NO...came off an inch at a time even with the heat gun.
Last edited:
Gruber
New member
Looking good Andy!
Icanbyorsuprman
Member
So how's this coming along? I am enjoying some of the detail and work. Really liking the marker tricks.
2-cents
New member
Yeah I'm kinda dying to know what's going on with the restore too! No pressure..... You've just got Some excited DOT owners watching this thread
Icanbyorsuprman
Member
I am really interested in seeing what you do with the inside cab area. Where what appears to have been vinyl. I haven't figured out that part yet. I really haven't had much time to work on it either.
Robotron Jon
Well-known member
whatever happened to this project...?
I hear about it every day.....when my wife has to trip over it to get to the laundry!
Seriously...with the amount of work the cabinet needed it just got put on the back burner. I have now got that factory cut DOT (http://forums.arcade-museum.com/showthread.php?t=176566&highlight=dot+craigs) and im planing on using all the parts from the EDOT in it at some point. I will restore the back half of the cabinet and put it back together. Hopefully sooner than later. I did get the 440 multi kit put in my Cheyenne tonight....thats one project out of the way!
Seriously...with the amount of work the cabinet needed it just got put on the back burner. I have now got that factory cut DOT (http://forums.arcade-museum.com/showthread.php?t=176566&highlight=dot+craigs) and im planing on using all the parts from the EDOT in it at some point. I will restore the back half of the cabinet and put it back together. Hopefully sooner than later. I did get the 440 multi kit put in my Cheyenne tonight....thats one project out of the way!
Last edited:
Robotron Jon
Well-known member
I hear about it every day.....when my wife has to trip over it to get to the laundry!
Seriously...with the amount of work the cabinet needed it just got put on the back burner. I have now got that factory cut DOT (http://forums.arcade-museum.com/showthread.php?t=176566&highlight=dot+craigs) and im planing on using all the parts from the EDOT in it at some point. I will restore the back half of the cabinet and put it back together. Hopefully sooner than later. I did get the 440 multi kit put in my Cheyenne tonight....thats one project out of the way!
I don't follow you - you are parting out an EDOT to be used in an upright or you are parting out the upright to use in the EDOT?
The upright I have IS a factory cut EDOT. The harness and lighting system are different. If I want to add back the Enviro part of the cab I will have to use the harness, Light relays, and lights from the EDOT.
