Amplifone - Lexel HVT Installation

bungy

Well-known member
Joined
Aug 24, 2009
Messages
3,055
Reaction score
149
Location
New Jersey
I thought I saw a guide somewhere for this transformer but now I can't find it. Does anyone know how to install the Lexel transformer?

attachment.php

attachment.php
 
Last edited:
It tells you in the Amplifone FAQ. Bolt it to the board and put the wires through the hole that is front of the BU406D and then run them back to their places and solder them on flat. I think you might have to drill that hole out a tiny bit to get all the wires through.
 
Thanks Arc, that's what I was looking for. Do you have the mouser part number for the resistor mod that I've seen on your HV rebuilds?
 
Back
Top Bottom