Amplifone HV board 50ohm 5W resistors

RetroHacker

Well-known member
Joined
Jul 14, 2008
Messages
4,313
Reaction score
109
Location
Schenectady, New York
I'm working on an Amplifone monitor in a Star Wars. I've installed a new flyback, caps and BU406D. Checking components on the board in the process, I found that both 50ohm 5W resistors are open. Looking at the schematic, those two parts aren't even in there. Are they totally necessary, or can the monitor be run without them for testing?

Thanks!

-Ian
 
I should order some of those TO-220 resistors. The Digi-Key part number is MP930-50.0F-ND

I see that the data sheet specifies use of thermal grease between these and the heatsink. Makes sense.
 
Back
Top Bottom