fcjim
Well-known member
I have had some generous folks help me with some parts for projects lately and I want to pay it forward. I've been cleaning out my stack of parts and I found two control panels to offer. The price includes shipping (US only) and paypal fees... so it's basically free but for the cost of shipping. Gonna go with the honor system here, I'd like to see these go towards somebody's project rather than ending up in another hoard or on ebay to make a quick buck (not that you'd get a ton for either of these).
EDIT: Both panels are have been claimed, thanks!
Battlezone control panel: some surface rust on the top side, not great cosmetically but might clean up to be decent. Bottom side is really nice. I also have the wood block (not pictured) that goes between the panel and the joystick bases. If you don't have a control panel at all on your BZ cabinet, I guarantee this is nicer than what you've got. $20 shipped. SOLD.
Tron control panel: SOLD. has some cigarette burns above the start button holes, significant cracking along the front bend, a couple screw holes through the CP on the right side (you can just barely see the top one in the first photo). Would be a great candidate for a new overlay, but I've seen worse. Also, it is missing one of the brackets where the hold down latches would grab the CP, which may not be too tough to fashion and weld on there if that's a skill you possess. $20 shipped. SOLD.
Thanks for looking!
EDIT: Both panels are have been claimed, thanks!
Battlezone control panel: some surface rust on the top side, not great cosmetically but might clean up to be decent. Bottom side is really nice. I also have the wood block (not pictured) that goes between the panel and the joystick bases. If you don't have a control panel at all on your BZ cabinet, I guarantee this is nicer than what you've got. $20 shipped. SOLD.
Tron control panel: SOLD. has some cigarette burns above the start button holes, significant cracking along the front bend, a couple screw holes through the CP on the right side (you can just barely see the top one in the first photo). Would be a great candidate for a new overlay, but I've seen worse. Also, it is missing one of the brackets where the hold down latches would grab the CP, which may not be too tough to fashion and weld on there if that's a skill you possess. $20 shipped. SOLD.
Thanks for looking!
Last edited:
