FS Parts: almost an entire Quantum

DPtwiz

Well-known member
Joined
Nov 2, 2006
Messages
8,099
Reaction score
621
Rating - 100%
86   0   0
Here's almost everything for a Quantum

reproduction cardboard bezel
reproduction control panel overlay
NOS back door sheet
reproduction marquee (has a small scratch on the backside)
reproduction phoenix arcade side art set
UNTESTED 19" ampliphone, tube, deflection, and HV
reproduction Wiring harness includes CP harness
reproduction takeman control panel, and lower bezel bracket
original marquee brackets
used coin door
used ARII-02 (looks recapped)
untested atari color vector brick
Coin door box/coin bucket
lighted trackball (needs rebuilt)

1200 for everything listed above, must be picked up, nw ohio, zip 43457

Missing 2 speaker grills, glass bezel, speakers, and light fixture.
Missing PCB, i do have a reproduction pcb, but do not have it in hand yet. 100% working. This was built from the blanks that were done years back.

When i get the PCB, i will sell it to whoever buys the lot, 1200.00
If you need a reproduction cabinet, i can make you one, 800.00 10-14 day lead time.

Do not want to seperate the lot. Message me with any interest/questions, thanks!
 

Attachments

  • SAM_3962.JPG
    SAM_3962.JPG
    409.4 KB · Views: 38
  • SAM_3963.JPG
    SAM_3963.JPG
    602.7 KB · Views: 34
  • SAM_3964.JPG
    SAM_3964.JPG
    378.5 KB · Views: 35
  • SAM_3965.JPG
    SAM_3965.JPG
    358.4 KB · Views: 34
  • SAM_3966.JPG
    SAM_3966.JPG
    291.8 KB · Views: 34
  • SAM_3967.JPG
    SAM_3967.JPG
    290.6 KB · Views: 35
  • SAM_3974.JPG
    SAM_3974.JPG
    343.3 KB · Views: 35
  • SAM_3975.JPG
    SAM_3975.JPG
    282.1 KB · Views: 37
  • SAM_3978.JPG
    SAM_3978.JPG
    521.2 KB · Views: 39
  • SAM_3979.JPG
    SAM_3979.JPG
    246.4 KB · Views: 39
remaining pics
 

Attachments

  • SAM_3980.JPG
    SAM_3980.JPG
    348.8 KB · Views: 36
  • SAM_3981.JPG
    SAM_3981.JPG
    506.5 KB · Views: 35
  • SAM_3982.JPG
    SAM_3982.JPG
    405.6 KB · Views: 37
  • SAM_3983.JPG
    SAM_3983.JPG
    316.8 KB · Views: 31
  • SAM_3984.JPG
    SAM_3984.JPG
    269.9 KB · Views: 32
  • SAM_3985.JPG
    SAM_3985.JPG
    229.4 KB · Views: 35
  • SAM_3986.JPG
    SAM_3986.JPG
    496.4 KB · Views: 35
  • SAM_3987.JPG
    SAM_3987.JPG
    276.1 KB · Views: 34
  • SAM_3988.JPG
    SAM_3988.JPG
    530 KB · Views: 32
This is how you get someone's attention who always says there is no room for more. Nice price for this project. I'm sure this will be gone before I can arrange a weekend to come pick it up. (and convince my wife)
 
bump! If anyone has an extra space duel, gravitar, or black widow cabinet, i can make you a conversion kit for 250 to turn it into a quantum cabinet...
 

Attachments

  • quantumconversionkit.jpg
    quantumconversionkit.jpg
    165.8 KB · Views: 32
bump.. i am making a new cab to include with all the parts, 2K for everything but the board, still don't have it in hand yet... art will be installed, i might have the correct T-molding, i have to look, if i do, i'll include it too...
 
That's not a Quantum. That's a Wuantum. You Wuantum too much.

:p

Sorry, I couldn't resist...

It would take Quantum Mechanics to put that together...

Sorry, again.

.
 
As someone who has built one of these (with a DPtwiz cab), $2k for all of that, with a cab, is a good price. All those small parts add up.

I'm VERY impressed with the quality of my DPtwiz cab. Really top notch work, and good attention to detail. Everything is tight and straight. It's every bit as solid as an original, if not better.

Good deal here. You might need to spend $0-500 to have the monitor boards refurbed (or do it yourself). And a repro game board will run you about $1000. Plus any other doo-dads, and you'll come in under $4000 (i.e., the magic Quantum price, no more, no less.) But that's par for the course, for scratch-building one of these.

GLWTS!
 
Back
Top Bottom