FS Parts: Alien Syndrome Bezel and Marquees

AlienSyndrome

Well-known member
Joined
Nov 28, 2011
Messages
1,286
Reaction score
320
Location
Lakewood, Colorado
Rating - 100%
41   0   0
Purchased these from the seller on eBay. I end up sourcing originals and do not need. These are repro marquees done on a film/translite material, not plexi. I believe they were reproduced using a conversion kit artwork as the original dedicated never had a graphic bezel. The bezel measures 23 1/2 " tall by 21 ' wide. The marquees are 22 3/4 X 7 3/4 . Please measure to make sure they will work. If placed in an original cabinet the bezel will be a little short and the marquee a little bit less wide on the sides about a 1/4 inch on each side so definitely made for a conversion unit.

$25 shipped
 

Attachments

  • 003.JPG
    003.JPG
    150.3 KB · Views: 32
  • drfg 001.JPG
    drfg 001.JPG
    161.4 KB · Views: 28
  • drfg 004.JPG
    drfg 004.JPG
    126.8 KB · Views: 25
  • drfg 002.JPG
    drfg 002.JPG
    131.6 KB · Views: 24
  • drfg 003.JPG
    drfg 003.JPG
    121.6 KB · Views: 22
Last edited:
Purchased these from the seller on eBay. I end up sourcing originals and do not need. These are repro marquees done on a film/translite material, not plexi. I believe they were reproduced using a conversion kit artwork as the original dedicated never had a graphic bezel. The bezel measures 23 1/2 " tall by 21 ' wide. The marquees are 22 3/4 X 7 3/4 . Please measure to make sure they will work. If placed in an original cabinet the bezel will be a little short and the marquee a little bit less wide on the sides about a 1/4 inch on each side so definitely made for a conversion unit.

$25 shipped
The Sun Corporation of America verifys the bezel is from the conversion kit since the kit was licensed to and sold by Sun, the same as Quartet 2.

Hmmm... Very tempted... of course, I'll need the conversion CPO too. 😣

Scott C.
 
Last edited:
Back
Top Bottom