After Burner 2 sit down deluxe working plus parts, motors, etc. For Sale

soundgood

New member
Joined
Jan 15, 2007
Messages
12
Reaction score
0
Location
San Jose, California
Rating - 0%
0   0   0
After Burner 2 sit down deluxe working plus parts, motors, etc. For Sale

I have a working After Burner 2 sit down deluxe. I have also replaced the casters and caster plates, so easier to move. I also have a second sit down deluxe non-working for parts. Board, controllers, motors, etc. I am ready to sale either or parts. Let me know. 925-639-2168 Located in Modesto, CA. Would take $500 for the working unit. A blast and calibrated great action. Will sale parts cheap.
 
Re afterburner

hi there

just in case the pcb [no cage needed] is for sale i really need one to get my restoration project working for a standup

please let me know, you might have to reply to the post as I am not up and runing with the message system


thanks loads
 
Afterburner II Sitdown Full motion Cockpit Deluxe.

I have a full machine but also a spare board. The board works but has some small sprite artifacts. Switched Rom's to check and nothing changed so I am guessing one of the on-board memories are causing the artifact. Do not know if your interested still on the spare board but if so just make an offer. 925-639-2168 or [email protected]
 
hi

thanks for info

as i don't have the skill yet to test and change the ram i better pass at the mo but i might still email you at some point depending on progress

thanks

paul
 
Afterburner II Sitdown Full motion Cockpit Deluxe.

If you have any questions about these machines give me a call. If your looking you can find a afterburner pcb repair at:

Arcade Circuit Board Repair offers flat rate arcade PCB repairs from $65.00 to $125.00 plus return shipping. If your PCB is found to be unrepairable, we will try to offer you an exchange PCB but the cost could be more. A repair estimate is given before any work is done to the PCB and a warranty is included with all repairs. Turnaround time is usually one week to ten days but this depends upon the condition of the PCB. We also repair most arcade game monitors and power supplies. Our shipping address is: Arcade Circuit Board Repair- 7505 Sevilla Dr.- Austin, TX- 78752. Call David at 512-771-5282 for more information.
 
I have a working After Burner 2 sit down deluxe. I have also replaced the casters and caster plates, so easier to move. I also have a second sit down deluxe non-working for parts. Board, controllers, motors, etc. I am ready to sale either or parts. Let me know. 925-639-2168 Located in Modesto, CA. Would take $500 for the working unit. A blast and calibrated great action. Will sale parts cheap.

I am looking for the screen mask and front bezel
 
Afterburner Deluxe sitdown

I am searching for the front monitor mask and bezel assembly
 
Back
Top Bottom