Aero City Nanao ms8-26 *too much green*

robotype

Member
Joined
Sep 14, 2006
Messages
208
Reaction score
5
Location
milano, Milano, Italy
I'm helping a friend remotely so I haven't inspected the monitor personally yet, I just told him try to tweak the pots to see if anything changes but that won't help, maybe bad pot/solder? or what else could have gone bad? stuck transistor for the green? looks like blue and red are present.
 

Attachments

  • cc950ec9-fffd-4134-9192-a725f76bc259.jpeg
    cc950ec9-fffd-4134-9192-a725f76bc259.jpeg
    401.5 KB · Views: 5
  • 3d61968f-5849-4817-abbe-8b0d74a23fdd.jpeg
    3d61968f-5849-4817-abbe-8b0d74a23fdd.jpeg
    468.2 KB · Views: 5
  • d95afb8d-3206-4294-8655-bb2b39a1c97d.jpeg
    d95afb8d-3206-4294-8655-bb2b39a1c97d.jpeg
    308.8 KB · Views: 5
Could be a cold solder joint on the neckboard, I'd check the driver transistor for red first since that's looking pretty weak in the RGB test image.
 
Back
Top Bottom