Advice needed on a multi 193 in 1 jamma board.

Black Matrix

Well-known member
Joined
Dec 21, 2006
Messages
3,290
Reaction score
35
Location
Greeneville, Tennessee
Hey all. I helped a guy install one of these Happy Fish 193 in 1 boards and I feel a bit like a failure at it. My question involves the button configuration. The board has a 5 wire kick harness that comes with it. I assume that is for the xtra buttons. I was trying to install it into an SF cab. I would assume that the kick harness is for the xtra buttons for the SF style games and the MVS fighters that use the 4 buttons. I wired up the 5 wires to the SF buttons. Despite the fact that I didn't have enough wires to wire up the SF buttons, I assumed either 1 or 2 might have a full set of six working buttons. But the SF games both were missing at least one button, and the MVS games didn't have a fouth button period. Does anyone know what the actual button map/pinout of this board is supposed to be. I have heard that some of these multi jammas continue button 4-6 wires right after the 123 buttons that are the norm for a jamma harness. Can anyone verify if this is the case on this board. Also, does anyone know why some of the games won't load. I would like to get this working better for the guy. Thanks ahead of time.
 
Not sure about the happy fish but for the 1072(1XXX) in 1, the Jamma Harness carries buttons 1-4 and the kick harness is just 5&6 for p1 and p2, with the 5th wire being the ground.
 
Back
Top Bottom