Addams family

blackdogmachine

New member
Joined
Oct 28, 2010
Messages
336
Reaction score
1
Location
middleton, Idaho
Can some one post a picture of lower left hand flipper coil on addams family, need to know where the 3 wires go to the coil. I got the schematic but want to make sure I got the order right, thanks.
 
I happen to be working from home today - Let me take a PIC in a few minutes after this conference call.
 
Look at the other flipper and do it the same way.

Lug 1 (outside banded diode lug, two winding wires, 50 volts):
Lower Left flipper: Grey/Yellow
Lower Right flipper: Blue/Yellow
Upper Left flipper: Grey/Yellow
Uppper Right flipper: Blue/Yellow
Note on fliptronics games, this lug's base wire color often changed to Red.

Lug 2 (middle lug):
Lower Left flipper: Blue/Grey
Lower Right flipper: Blue/Purple
Upper Left flipper: Black/Blue
Uppper Right flipper: Black/Yellow

Lug 3 (outside non-banded diode lug, one winding wire):
Lower Left flipper: Orange/Blue
Lower Right flipper: Orange/Green
Upper Left flipper: Orange/Grey
Uppper Right flipper: Orange/Purple
 
Yep I got that Shadow.

The lightboard in the backbox wasn't latched properly so the translite has a not so nice 1-2" gouge right through the artwork!

I also had to fill in the sanctum wear, and repair the wall target, as it started to malfunction right away. Part of the of assembly underneath for the drop target is actually worn right off where it pivots, and that needs to be fixed still.

I also had to replace the righthand flipper coil as one of the tabs was busted right off and the flipper wire wouldn't stay attached.

Besides that, it's been working like a champ, love the game. The translite gouge sucks as I can't really fix that, but that's life I guess..

I miss my Addam's Family, I wouldn't mind having another one, I shouldn't have sold mine :(
 
Last edited:
pins

I just paid $3k for a real nice AF, just installed LED kit. nice game I like it. Also just got near new in box Junk Yard for cheap, A mint Fish Tales, very nice Party Zone and a near mint Cirquis Voltair. CV has been good until last night the ringmaster quit working and blowing F107 and 20 volt circuit is dead. still tracking it down, hope its something simple like a shorted ring master motor. good addition to my mint T zone and mint STNG. the line ups looking good but AF and CV are down
 
I just bought a TAF, got it yesterday, really cool addition.
Are the LED's worth doing?
Also it seems like the back box light creates so much reflection it makes it hard to see the play field. Any ideas? I noticed the machine is capable to dim the lights.
Maybe some GI is out..... Dunno

I bought the magnet fuses as soon as I got the machine, need to get cliffy protectors too.
 
Whys it so dark in the top right quarter of the play field? Do leds brighten it up considerably?
 
I'm thinking that's why people do the bookcase light and the swamp light mods.
I am trying to figure out the right step myself as I'm not normally one to mod anything.

There really is no right step in regards to mods since its not factory. That being said I would do what you think makes it cool to you.
 
Back
Top Bottom