Add dollar validator?

BRENTON

New member
Joined
May 25, 2010
Messages
8
Reaction score
0
Location
Oregon
I just purchased a Dr Pepper machine that takes coin only. I don't know details of the machine quite yet, but I will as soon as I pick it up.

My question is this: Is it possible to add a dollar validator to this unit, and if so, how difficult is it.

Thank you,
 
As far as I know, a dollar vaildator is a child of the coin mech, not the machine. The validator speaks to the coin mech, and the coin mech speaks to the vending machine. So, your validator depends on if your coin mech is capable of using one. Post the make and model of your coin mech and I will try to dig up some info.
 
Ill be back in the morning with machine specs.
Thank you
 
dixie narco dn 276

I purchased a Dixie Narco DN 276
it has a Mars 6200c coin acceptor on it
 
These companies sell harnesses/adapters, etc that allow you to install bill validators with most coin changer models in many vending machines:

http://www.capitalvending.com/

http://www.veii.com/

http://www.advendtech.com/index.php

http://www.dsvendinginc.com/

http://www.vendorsrepair.com/harness.htm

Some harnesses are available on ebay such as these:

http://cgi.ebay.com/COINCO-VALIDATO...md=ViewItem&pt=BI_Vending&hash=item45ef67a211

There ya go! Should be a matter of getting the correct harness, and then mounting the validator. If this isn't an option, there are stand alone change machines that are kinda small, that can bolt to the side of your vending machine.

CM3050_changeMachine.jpg


Seaga makes that one. Check eBay...they always have a few on there.
 
Oh, and welcome to the community. Lots of helpful folks here. You've met Ken, he is one of the more helpful fellows here. He's forgotten more than most of us will ever learn.
 
Back
Top Bottom