A quick question about Killer Instinct

bustedstr8

New member
Joined
Dec 30, 2007
Messages
344
Reaction score
3
Location
Stoughton, Massachusetts
I recently picked up a dead KI pcb only. After fixing some lifted pins on the quad 208 I have
both leds working and booting to a loud tone and rug pattern. What should I be seeing in
a working pcb with no drive?
 
the lower 1/8th of the screen normally stays black but yes blue screen rolling down and refreshing (looking for Hard drive).

Sounds like you have the same problem i had, I sent mine to Chad @ Arcadecup.com he did a wonderful job fixing it.
 
blue screen is a VERY good sign. when you get that funky white line pattern screen, then you're in trouble.

props on fixing those legs. did you use a soldering station to do that?
 
I used a butane pencil, it was a lot steadier for me than the wired station.
I had to go back with the loupe and some small bits of wick and tweezers to clean a few
bridges....it was still a pain in the ass.
 
Back
Top Bottom