9110 HANTAREX not start

shinobi3

New member
Joined
Jun 6, 2007
Messages
50
Reaction score
0
Location
Spain
Chassis had a house full of dust, and I began to try to revive it.

I have taken some measures to see if you can guide me a bit.

SP4 -> 109V
SP3 -> 127V

BUS508A -> central 109v.
TDA1675A -> pin14 v 0.63

Flyback -> pin 1 and 3 109V.

WITH DISABLING D10, the fan turns, but time stops, and bu508 very hot.

the flyback is ruled out, I changed to another, the diodes D12 and D13 checked and ok, capacitors C36, C37, c40 and c41 changed.


If you need to measure any component or something, I'll comentais.

greetings and thanks.
 
Last edited:
Back
Top Bottom