flyingdutch
New member
Hey y'all.
Looking for parts to complete my bally 8 ball CHAMP project. Last of the 8 ball mohicans.
Needed are :
- The spinning "champ" target. If it is in good condition. The one I have has significant paintdamage and I a little nervous about trying to repaint it just to watch chips of paint fly all over the playfield.. I know there used to be a supplier that offered stickers for these, but I cant find 'm to save my life.
- The lettered targets (ones behind the droptargets). Repainted the ones i have to make up for the damage to the lettering, but unpainted ones will undoubtedly look better. (if theyre not damaged obviously..
- one of the entry lane guides (the red generic ones; its supposed to have three small ones and one longer one under the far left hand plastic, but I just need one of the shorter ones)
- The plastic right behind the right hand bumper (0838-00900-11xf)
- If you have the correct and intact bumpercaps, Id be interested in those too. (found repro's online, but if you have 'm..)
- The clear plastic piece that makes up the bottom part of the spinner lane (0838-00900-14xf)
- The "G" centerpiece plastic. I dont have a partnumber for it, but I know its supposed to be there.
- The right hand side "thumper" piece (one with woman's face - 0838-00900-02xf)
- The right hand outlane guide top plastic (0838-00900-08xf)
That would pretty much sum it up.
Let me know what you might have sitting around and ow. yeah. If you happen to be from cameroon and have a magic pinballwarehouse where parts magically appear and are represented by pictures that look and awfull lot like they were hijacked from ipdb, please dont react?
Thanks!
Looking for parts to complete my bally 8 ball CHAMP project. Last of the 8 ball mohicans.
Needed are :
- The spinning "champ" target. If it is in good condition. The one I have has significant paintdamage and I a little nervous about trying to repaint it just to watch chips of paint fly all over the playfield.. I know there used to be a supplier that offered stickers for these, but I cant find 'm to save my life.
- The lettered targets (ones behind the droptargets). Repainted the ones i have to make up for the damage to the lettering, but unpainted ones will undoubtedly look better. (if theyre not damaged obviously..
- one of the entry lane guides (the red generic ones; its supposed to have three small ones and one longer one under the far left hand plastic, but I just need one of the shorter ones)
- The plastic right behind the right hand bumper (0838-00900-11xf)
- If you have the correct and intact bumpercaps, Id be interested in those too. (found repro's online, but if you have 'm..)
- The clear plastic piece that makes up the bottom part of the spinner lane (0838-00900-14xf)
- The "G" centerpiece plastic. I dont have a partnumber for it, but I know its supposed to be there.
- The right hand side "thumper" piece (one with woman's face - 0838-00900-02xf)
- The right hand outlane guide top plastic (0838-00900-08xf)
That would pretty much sum it up.
Let me know what you might have sitting around and ow. yeah. If you happen to be from cameroon and have a magic pinballwarehouse where parts magically appear and are represented by pictures that look and awfull lot like they were hijacked from ipdb, please dont react?
Thanks!