6100 no hv, no led

mr.fixit

Well-known member
Joined
Aug 7, 2011
Messages
1,009
Reaction score
160
Location
arnold, Missouri
well my gravitar is getting better , i sent the monitor off to repair to slackmoe , well it sorda works . I get no hv, but the led dosent come on. the spot killer is not lit and i can hear chatter. but no hv . So i replaced all of my electrolytic capacitors and fired it up r907 blew , both diodes check good , the hot too and all the transistors check good . im at a brick wall anyone had this issue or similar ?
 
Check your CAPs orientation. C902 specifically. Also pull and recheck the transistors near R907. Check for good continuity between each part of the circuit near there. Check for shorts and solder bridges.
 
Back
Top Bottom