6100 B+ Question

Robran68

Well-known member

Donor 2011
Joined
Feb 17, 2008
Messages
3,619
Reaction score
36
Location
Fraser, Michigan
I measured the B+ on a couple of my vectors and they showed give or take 168v. I've read most adjust the B+ to be 180v, is it ok to run them at 168v??
 
Sure, as long as you are having no problems. If you have any weirdness, bump it up closer to 180...
 
I had the HV protection go on in one of mine, setting it to 180v. I turned it back to 170v. I've had no issues running at that voltage.
 
Back
Top Bottom