60 in 1 setup help

Rome

New member
Joined
Jun 16, 2009
Messages
124
Reaction score
0
Location
Florida
I am having trouble setting up my 60 in 1 board.. the instructions are not so specific.. I have a pacman cocktail that had tetris running in it.. i took the tetris board out put in the 60 in 1 board, turned it on, and had a working multicade, just that all games are on PREVIEW, and i can't play them.. when i credit up, it doesn't add credits.. so i am not sure how i get to playing these games.. i don't understand where the test swtich or service switch is, i don't see one on the board itself, so can someone guide me to what to do, or where to set my switches so i can play this darn thing.. Thanks
 
60 in 1

DUH...HAHA... yeah, i just figured this out.. when you just press the fire button, it just previews the game.. on the actual game select screen you have to press start, not fire.. LOL.. I figured that out, now i am just having trouble finding the test screen so i can set my virtual settings.. i set my switches to off,off, on, on and i get a screen test screen and no matter what buttons or joysticks i move, nothing happens, even the service switch just inside the coin door does nothing.. i'm clueless how to get to test screen, can someone guide me on how to do it?? as when i'm on screen test screen, only way to get out is to power down the machine and reset my dip switch settings to normal again.. Having fun yet??

It previews the game when you press button 1. Did you press start?
 
If you don't have two buttons on the control panel, then you can't advance though the settings menu when accessing it via Dip Switch #4.

If you have a TEST button or switch, hold it in or turn it on when you power up. This will boot to the same menu. Then you can use the test button to advance through the screens and the fire button to make changes. Start button saves your changes on every screen except the switch-test screen...
 
Back
Top Bottom