60 in 1 problem

pintom

Member
Joined
Apr 24, 2009
Messages
276
Reaction score
2
Location
Charlotte, North Carolina
Got my brand new 60 in 1 board in and hooked it up to my working Twin Cobra jamma and I get the test menu but it's quickly scrolling verticly I checked the voltages coming out of the ps they are right where the should be any tips on where to look next?
 
Adjust your monitor? Check your sync as well. Make sure the 60-1 is set to the CGA setting if using an arcade monitor. Read the manual and flip the correct dip switch if you haven't done that yet
 
if you saying the info scrolling.i would say you got a stuck switch on the console make it move through the info.or maybe you got a bad board if you got it from jamma parts talk to nick he will help you out.hes a good guy.
 
He says scrolling vertically, that sound more like a sync issue to me could be the cab he is using was wires for positive instead of negative? Or is it the other way around? Lol. I've seen something like that when the sync was opposite.
 
Tom, it's probably set at the wrong resolution like sk8er was saying.... they ship them set up for VGA, you have to turn one dipswitch off to get it set up to your CGA monitor. Let us know if that fixes it up for you.
 
Good stuff, now you can get some Galaga 3 Goodness going on. Love that game, and Jr. Pac-Man the most on the multigames. Have fun with it.
 
Back
Top Bottom