60 in 1 jamma problems

brian77

New member
Joined
Aug 3, 2009
Messages
100
Reaction score
0
Location
wichita, Kansas
i just got it installed and got the controls working good,but the screen is sideways..does anyone know how i fix this? i change it to flip screen and it flips the other direction(still sideways) i really want to play but it hard playing sideways...its driving me nuts
thanx for your help
Brian
 
sounds like you have a cab that has a horizontally mounted monitor and you are trying to get a board that represents vertically to represent vertically on a horizontally mounted monitor. It doesn't work that way. You have to change the monitor orientation or basically mount the monitor vertically in the cab rather than horizontally.
 
ok.. couple of more questions...will the current chassis work and do i have to discharge the monitor first?
 
You need to rotate the whole monitor, not any of the electronics. The chassis you have will be fine.

You could rotate it without discharging if you are careful. Personally, I awlays discharge them first just to be safe, but lots of people don't.
 
i got it rotated and everything working..it only had 4 screws holding the whole big board and all..i just had to move a ground...alot simpler then i thought.i always make everything harder than what it is...thanx for your help
 
Back
Top Bottom