60 in 1 Issue

jjohnston2004

Member

Donor 2014-2015
Joined
Aug 19, 2014
Messages
307
Reaction score
5
Location
Morganville, New Jersey
Hello All,

I'm working on a multigame machine (my first multigame) and noticed that it's having an issue with the sync.

It's a 60 in 1 board with a G07 and i'm noticing a little bit of curl on the side (or top of the G07).

This monitor has been recapped and the B+ is 122V; just for reference I did swap out another jamma board (Pandoras box 3) and it had no curl at all.

This monitor is hooked up using negative sync.

Please review photos for reference.

Thanks,
Jj
 

Attachments

  • CSr0uz0WFxgGGDyoJKYWUiK5HZviat0ps_q6amyivCUpX92IB.jpg
    CSr0uz0WFxgGGDyoJKYWUiK5HZviat0ps_q6amyivCUpX92IB.jpg
    198.1 KB · Views: 20
  • QQHyXBbV5x26RzzQMmesQc9qSPzWFOagvMgIho_xRJspX92IB.jpg
    QQHyXBbV5x26RzzQMmesQc9qSPzWFOagvMgIho_xRJspX92IB.jpg
    199.5 KB · Views: 22
I adjusted the pots and the b+ and got it somewhat better, I'll try out the curl mod if that issue keeps annoying me lol. It did seem odd to me that the Pandora's box board had no curl....but I'm guessing like you said the curl affects different boards, differently.
 
Last edited:
Back
Top Bottom