60 in 1 in a nintendo cab- monitor question

THEDJ

New member
Joined
Oct 20, 2008
Messages
520
Reaction score
4
Location
SOUTHPORT, Indiana
I am having trouble with sync on a icade 60 in 1 and connecting to a sanyo ez20 monitor.

Can some one tell me the which pin the sync and ground wire connect to?


thanks
chris
 
The Nintendo pinout is:
Pin1
G
R
B
Ground
Ground
Sync
Pin6

I believe...this is from memory...please feel free to correct.

You can tie the two grounds together into your Jamma harness video ground.

Make sure you are using an inverter board as well.
 
Last edited:
The Nintendo pinout is:
Pin1
G
R
B
Ground
Ground
Sync
Pin6

I believe...this is from memory...please feel free to correct.

You can tie the two grounds together into your Janna harness video ground.

Make sure you are using an inverter board as well.

look at you giving out monitor advice:D

yes sk8ersublime is correct.

Peace
Buffett
 
Back
Top Bottom