60 in 1 icade (old style) 3 flashing led's problem

wvhyperboy

New member
Joined
Nov 4, 2009
Messages
223
Reaction score
1
Location
Clarksburg, West Virginia
I picked up an older style (not the smaller) 60 in 1 icade to put in a little homemade cab for kids clubhouse. When I hooked it up LED 5 is green and LED's 1,2,3 are flashing Red, Green, Orange. No boot or any action at all on the screen. It's in a known working setup and I have checked voltages at board and am getting 5.10 and 12.01 I have adjusted the 5v down to 5 and up to 5.25 with no change in operation. I have removed and reset chip and again no change. I cannot find any docs on the flashing LED's or much else for that matter. Any help or suggestions would be greatly appreciated.

\m/
 
Back
Top Bottom