60 in 1 audio pinout

gatordad

Well-known member
Joined
Aug 29, 2007
Messages
1,853
Reaction score
79
Location
Illinois
I am having some sound issues with my 60 in 1 board, I bought it used and no manual was included. What is the harness pinout for these? specifically speakers.

Anyone have one they can post or link to

I currently have my speaker on 10 and L sound is very faintly heard, I have her cranked up from the menu and the sound pot on the board.
I hope this is simple.
Thanks
 
What is the ohm's reading on your speaker? Is it 4 or 8 ohms? Is their another pot in the cabinet? i would put another jamma board in and see if you have sound. You could have a bad speaker, bad connection at speaker wires.
 
Make sure you're running the speaker off pins 10 and K, and not pins 11 and L. Pins 11 and L are for JAMMA boards that have stereo sound, but the multiboard doesn't, and is only outputting sound on 10 and K...

Hmmmm now I'm confused. I was doing some searching trying to answer my own question
The online pdf manual that you linked to says it's 10 and L

but Mod says its 10 and K

who do I trust the Chinese or Mod?
 
10 & L are correct. Check the cab to see if there is another volume control in it...
 
Thanks got it.
Turned out when I repinned my harness last night I had a speaker wire in a wrong position
Hard to see the black stripe on a white wire when it's late I guess.
 
Back
Top Bottom