60 in 1 arcade problems

22troy

New member
Joined
Sep 1, 2009
Messages
169
Reaction score
1
Location
North Carolina
Hi guys,
I know very little about arcade games so I'm sorry if this is a dumb question. I turned on my 60 in 1 Ms. Pacman cabinet tonight and the monitor powers up, but nothing comes on. I checked the fuses near the power supply and one was blown. It says "F2A" on it. Does this mean it's a fast blow 2 amp fuse? If so where can I get some? Thanks in advance for your help.

Troy
 
fuse

likey a 2 amp fuse, yes,
likey slo blow though
home depot or radio shak has them
when you put a new one in, watch it, and if it blows again, either you have a bad power supply, or short in wiring somewhere
 
I found a 2A fuse, and still nothing. It didn't blow the fuse. *The power supply light isn't coming on so maybe that's bad. Where can I buy one of those? Thanks again for your help.
 
I think the power supply is toast. I checked the voltage and I'm not getting anything. I ordered another PS so hopefully I'll be back up and running soon. Thanks for everyone's help.
 
Verify you have power going TO the PS, not just FROM the PS. Measure to see if you have 120vac at the AC inputs. If you do, and no voltage is coming out, then replace it. If you don't, then find out why not...
 
Back
Top Bottom