60-1 Free Play?

jow

Well-known member

Donor 2011
Joined
Feb 1, 2007
Messages
28,378
Reaction score
1,473
Location
California
My buddy has a 60-1 PCB and can't put it in free play? The manual says to turn ON dip switch 3 on SW2, but the PCB only has one set of switches marked SW3? SW3 controls the monitor orientation, high score save, etc but nothing with free play? Is he screwed?
 
Free play is set in the menu. Turn on switch 4 and boot up. That goes into the soft menu dips where you set free play, etc.
 
Could be. Is it a "B" board?
From what I've seen/heard some of the "B" boards have these weird glitches where some basic stuff just doesn't work.
 
Just turned it off. There were two options for sound/music in the same menu where you set up free-play. I'm not sure which was which, but I turned them both off and now have silence while the game is on the game menu.
 
I have been trying to get back to the Menu, but for some reason, mine won't go. I have the "A" board, but setting it to DIP 4 still doesn't work.
It's frustrating because that Demo Music makes me want to claw my eyes out, snort wasabi and run into on coming traffic.
 
Dip swithc 4 should go into the menu AT BOOT UP. This means the game needs to be off when you move the switch.

Otherwise, if you have a test button hooked up, hold the test button in when you turn it on...
 
Yeah I cant stand it. Its kool maybe for the first 2 secs then it sounds like a big black dick raping your ear, over and over

AHAHAHAHAHAHAH. I'll "rep" you for that one tomorrow when I can again.
 
Yeah I cant stand it. Its kool maybe for the first 2 secs then it sounds like a big black dick raping your ear, over and over


You have succeed in conjuring up a very disturbing image. However, I believe you might need a different tool for an ear canal.
 
Back
Top Bottom