TooDarkParcade
New member
I have a Golden Tee '97 cabinet: monitor, power supply, board, control panel, coin mechs marquee card are all there. It wont turn on so its untested. Cab is in nice shape and so is the board. The monitor looks brand new as well as the power supply. Its missing the back panel. Underneath the Golden Tee art on CP are holes for 2 joystick and extra buttons. Its missing the backdoor. This cab is perfect for a 4 player conversion.
Also have a 6 slot NeoGeo MVS. It has no monitor, power supply, or coin mechs, but all the wiring and harness are there and the circuit boards for the LED #'s on CP and the NeoGeo card reader in the CP. Under the metal card marquee, under the metal CP, and on top of the metal plate that covers the board slots is surface rust. I've scrubbed most of it off but dont really have the time/space to repaint and restore it properly. The board, the marquee digital light boards, and CP buttons and joysticks all look fine despite the amount of surface rust. I also put in the missing buttons and better joysticks. The cab itself is in decent shape. Havent tested the board at all.
Both cabs sold "as is". You are free to inspect before purchase.
Asking $150 a piece. Pick up in Oakland/Berkeley area. You will need a truck and dolly.
If you have any questions, please feel free to PM me.
Also have a 6 slot NeoGeo MVS. It has no monitor, power supply, or coin mechs, but all the wiring and harness are there and the circuit boards for the LED #'s on CP and the NeoGeo card reader in the CP. Under the metal card marquee, under the metal CP, and on top of the metal plate that covers the board slots is surface rust. I've scrubbed most of it off but dont really have the time/space to repaint and restore it properly. The board, the marquee digital light boards, and CP buttons and joysticks all look fine despite the amount of surface rust. I also put in the missing buttons and better joysticks. The cab itself is in decent shape. Havent tested the board at all.
Both cabs sold "as is". You are free to inspect before purchase.
Asking $150 a piece. Pick up in Oakland/Berkeley area. You will need a truck and dolly.
If you have any questions, please feel free to PM me.

