50 + Different Items For Sale or Trade (Monitor, PCBS, Manuals, Flyers, Artwork,.
Pictures can be found on my flickr page http://www.flickr.com/photos/djdns/sets/
1. Nanao 25" Med-Res Monitor out a Daytona upright (very nice picture with no to very little burn & chassis has recently been service) $175 pick up only
2. Daytona USA working main PCB (SOLD)
3. Sharp Image chassis & remothe board tagged 27" RCA KTMF (KT-2641M) This was a working chassis that I pulled off a monitor that I broke the neck on awhile ago and just found it while going though some stuff. Not sure if it was a 25 or 27" tube. $65 shipped
4. All manuals (over 150) are $8 each shipped or 3 for $20 shipped except the manuals with schematics which are $12 each shipped. (Can be mixed with Flyers)
http://www.flickr.com/photos/djdns/sets/
5. All flyers (over 150) are $8 each shipped or 3 for $20 shipped (Can be mixed with Manuals)
http://www.flickr.com/photos/djdns/sets/
6. Original Pacman Complete Control Panel $50 shipped (SOLD) *I have one more of these*
7. Orignal Ms Pacman Complete Control Panel $50 shipped (SOLD)* I have one more of these*
8. Original Galaxian Complete Control paney $50 shipped
9. Original Galaga Control Panel (SOLD)
10. Original Asteroids Cocktail Control Panels in good condition $45 shipped
11. Donkey Kong 3 PCB working 100% (SOLD)
12. 2 Space Duel non working PCBs (one plays blind and the other will as well if you replace a bad rom I found on the board. both for $85 shipped
13. XX Mission PCB (working 100%) $35 shipped
14. Sega Naomi Virtua Fighter 4 Evolution GD Rom Disc & Security Doggle $45 shipped
15. Paddle Mania PCB (working 100%) $40 shipped
16. Tournament Arkanoid PCB (working 100%) (SOLD)
17. Double Dribble PCB (working 100%) $25 shipped
18. Devasters (working 100%) $35 shipped
19. Lucky & Wild PCB (working 100%) $65 shipped
20. Frontline working 100% $85 shipped
21. Silk Worm pcb working 100% PCB $45 shipped
22. 1942 "untested" PCB (probably works, but have no way to test it) $35 shipped
23. Complete Frontline cabinet wiring with filter board $65 shipped
24. Donkey Kong / Nintendo original cabinet wiring (9P, 10P, 5P & Video Cable) (SOLD)
25. Donkey Kong / Nintendo original video cable $10 shipped
26. Nintendo audio/sound cable $10 shipped
27. Taito Alpine Ski Project Cabinet in good shape to be original. Has a little damage to the top right corner. Wiring is still intact minus the power supply $150
28. Mario Bros "widebody" Machine in good condition (coming out my personal collection) with High Score Save Kit, New CPO, Recapped monitor $600
29. Centipede 60 in 1 Multicade Machine w/ trackball & joystick $950
30. Empty Project Robotron/Joust Cabinet (no top back door) $75
31. Elephant Balls 8' Slate Pool Table (paid over $2000 for it, just want it out my garage)$400
32. Daytona USA Twin Machine (both were working & one might have an issue now, not 100%. They been sitting in my garage for almost two years now unplayed) Take them both for $500 as is
33. Empty Converted Track & Field Cabinet (TRADED)
34. Pacman Empty Cabinet (SOLD)
35. Birdie King Machine (working) $75
36. Double Dragon Empty Cabinet was converted to a world rally $25
37. 2 Sega Turbo Minis mostly complete minus pcbs with working monitors Both (TRADED)
38. Candy Cab Project (should just need to be wired up for jamma & was told the monitor was good $125
39. Empty Dynamo Empty Cabinet with Ikari Warriors sideart for a 19" Monitor $25
40. Gorf Amp Board (working) $30 shipped
41. Wizard of Wor Amp Board (working) $30 shipped
42. 4900 (working) yoke, rings & coil $35 shipped
43. Taito 2 door unit (Small) Top Coin Door with frame & Bottom Door $100 shipped
44. Berzerk style Stern Coin Door in good shape $50 shipped
45. Coin Buckets $25 each shipped or $35 each shipped with lid http://www.flickr.com/photos/djdns/sets/72157626337631321/
46. Star Castle Complete "untested monitors" $65 each & pick up only or Take all 5 for $200
47. Sharp Nintendo Style Monitors "untested" $65 each or Take all (SOLD)
48. OutRun 2 single sitdown driver with 25" monitor (SOLD)
49. Championship Sprint "coming soon"
50. Multicade unpopulated control panel with trackball, joystick & 3 buttons. Has a textured finish. $30 shipped
"these items I have (50 - 65) are for trade only unless otherwise noted"
50. Berzerk "clnmoore" Repro metal control panel overlay
51. Berzerk / Frenzy Multi-Board
52. Jrok Multi-Williams Board (SOLD)
53. Phoenix Arcade Multi-WIlliams Marquee (will consider $ offers)
54. Reactor working main pcb (TRADING / SOLD)
55. Tapper Tap Joysticks "pair" (will consider $ offers)
56. Taito Tinstar NOS control panel overlay
57. Qbert Control Panel with NOS overlay, NOS buttons, rebuilt Joystick (plug & play)
58. Tapper Control Panel completely redone (will consider $ offers)
59. Timber working boardset (SOLD)
60. Burgertime PCB (SOLD)
61. Moon Patrol PCB with High Score Save Kit (will consider $ offers)
62. Donkey Kong PCB (will consider $ offers)
63. Marble Madness Machine
64. TaitoTronics Phoenix Machine (will consider $ offers)
65. JVL ELcipse iTouch 10 megatouch countertop machine (will consider $ offers)
66. Multi-Taito board (This is the original one that you can swap sd cards on, not the newly released one with the problems)(SOLD)
********** ITEMS I NEED ****** ITEMS I NEED ********* ITEMS I NEED *********
1. Reactor cabinet empty or project machine
2. Super Bagman machine, PCB, Marquee, Sideart
3. Bagman nice control panel or nice plexi control panel overlay
4. Qbert NOS sideart
5. Juno First machine, control panel, control panel overlay, bezel
6. Qbert Qubes machine / project, control panel, cpo, bezel, sideart
7. Qbert nice original or repro glass bezel
8. A nice Atari Assault machine or cabinet (doesn't have to work, but looking for the cabinet to be in good shape), sideart,
9. ZVG Zektor's Vector Generator
10. Mad Planets machine in good condition, bezel
11. Whirlwind Pinball (new fan topper)
12. Taito Cabinet (Tan colored one that the Tin Star came in or Brown colored like the one Elevator action came in)
13. Mikes Arcade 2 in 1 Jamma Adapter
14. Arcade Flyers (Asteroids Deluxe, Defender, Gyruss, Joust, Mario Bros, Zeke's Peak, Juno First, Bagman, Super Bagman, Qbert Qubes, Taitotronics Phoenix)
15. Vision Pro 19" monitor chassis
16. Multi-Williams control panel, cpo, bezel
17. 60 in 1 pcb (would just like to trade something for one, not a priorty)
18. Berzerk Machine or Cabinet in very good condition (doesn't have to work)
19. Zeke's Peak Control Panel Overlay, Sideart
20. Space Duel Cabinet in great condition doesn't have to work or be complete
21. System I working main board to be able to play Marble Madness
22. Sega Naomi Gd Rom
23. Track & Field Sideart
24. Vision Pro MTG-1901cn Chassis
25. Mortal Kombat II control panel & full sideart for a dedicated cabinet
Pictures can be found on my flickr page http://www.flickr.com/photos/djdns/sets/
1. Nanao 25" Med-Res Monitor out a Daytona upright (very nice picture with no to very little burn & chassis has recently been service) $175 pick up only
2. Daytona USA working main PCB (SOLD)
3. Sharp Image chassis & remothe board tagged 27" RCA KTMF (KT-2641M) This was a working chassis that I pulled off a monitor that I broke the neck on awhile ago and just found it while going though some stuff. Not sure if it was a 25 or 27" tube. $65 shipped
4. All manuals (over 150) are $8 each shipped or 3 for $20 shipped except the manuals with schematics which are $12 each shipped. (Can be mixed with Flyers)
http://www.flickr.com/photos/djdns/sets/
5. All flyers (over 150) are $8 each shipped or 3 for $20 shipped (Can be mixed with Manuals)
http://www.flickr.com/photos/djdns/sets/
6. Original Pacman Complete Control Panel $50 shipped (SOLD) *I have one more of these*
7. Orignal Ms Pacman Complete Control Panel $50 shipped (SOLD)* I have one more of these*
8. Original Galaxian Complete Control paney $50 shipped
9. Original Galaga Control Panel (SOLD)
10. Original Asteroids Cocktail Control Panels in good condition $45 shipped
11. Donkey Kong 3 PCB working 100% (SOLD)
12. 2 Space Duel non working PCBs (one plays blind and the other will as well if you replace a bad rom I found on the board. both for $85 shipped
13. XX Mission PCB (working 100%) $35 shipped
14. Sega Naomi Virtua Fighter 4 Evolution GD Rom Disc & Security Doggle $45 shipped
15. Paddle Mania PCB (working 100%) $40 shipped
16. Tournament Arkanoid PCB (working 100%) (SOLD)
17. Double Dribble PCB (working 100%) $25 shipped
18. Devasters (working 100%) $35 shipped
19. Lucky & Wild PCB (working 100%) $65 shipped
20. Frontline working 100% $85 shipped
21. Silk Worm pcb working 100% PCB $45 shipped
22. 1942 "untested" PCB (probably works, but have no way to test it) $35 shipped
23. Complete Frontline cabinet wiring with filter board $65 shipped
24. Donkey Kong / Nintendo original cabinet wiring (9P, 10P, 5P & Video Cable) (SOLD)
25. Donkey Kong / Nintendo original video cable $10 shipped
26. Nintendo audio/sound cable $10 shipped
27. Taito Alpine Ski Project Cabinet in good shape to be original. Has a little damage to the top right corner. Wiring is still intact minus the power supply $150
28. Mario Bros "widebody" Machine in good condition (coming out my personal collection) with High Score Save Kit, New CPO, Recapped monitor $600
29. Centipede 60 in 1 Multicade Machine w/ trackball & joystick $950
30. Empty Project Robotron/Joust Cabinet (no top back door) $75
31. Elephant Balls 8' Slate Pool Table (paid over $2000 for it, just want it out my garage)$400
32. Daytona USA Twin Machine (both were working & one might have an issue now, not 100%. They been sitting in my garage for almost two years now unplayed) Take them both for $500 as is
33. Empty Converted Track & Field Cabinet (TRADED)
34. Pacman Empty Cabinet (SOLD)
35. Birdie King Machine (working) $75
36. Double Dragon Empty Cabinet was converted to a world rally $25
37. 2 Sega Turbo Minis mostly complete minus pcbs with working monitors Both (TRADED)
38. Candy Cab Project (should just need to be wired up for jamma & was told the monitor was good $125
39. Empty Dynamo Empty Cabinet with Ikari Warriors sideart for a 19" Monitor $25
40. Gorf Amp Board (working) $30 shipped
41. Wizard of Wor Amp Board (working) $30 shipped
42. 4900 (working) yoke, rings & coil $35 shipped
43. Taito 2 door unit (Small) Top Coin Door with frame & Bottom Door $100 shipped
44. Berzerk style Stern Coin Door in good shape $50 shipped
45. Coin Buckets $25 each shipped or $35 each shipped with lid http://www.flickr.com/photos/djdns/sets/72157626337631321/
46. Star Castle Complete "untested monitors" $65 each & pick up only or Take all 5 for $200
47. Sharp Nintendo Style Monitors "untested" $65 each or Take all (SOLD)
48. OutRun 2 single sitdown driver with 25" monitor (SOLD)
49. Championship Sprint "coming soon"
50. Multicade unpopulated control panel with trackball, joystick & 3 buttons. Has a textured finish. $30 shipped
"these items I have (50 - 65) are for trade only unless otherwise noted"
50. Berzerk "clnmoore" Repro metal control panel overlay
51. Berzerk / Frenzy Multi-Board
52. Jrok Multi-Williams Board (SOLD)
53. Phoenix Arcade Multi-WIlliams Marquee (will consider $ offers)
54. Reactor working main pcb (TRADING / SOLD)
55. Tapper Tap Joysticks "pair" (will consider $ offers)
56. Taito Tinstar NOS control panel overlay
57. Qbert Control Panel with NOS overlay, NOS buttons, rebuilt Joystick (plug & play)
58. Tapper Control Panel completely redone (will consider $ offers)
59. Timber working boardset (SOLD)
60. Burgertime PCB (SOLD)
61. Moon Patrol PCB with High Score Save Kit (will consider $ offers)
62. Donkey Kong PCB (will consider $ offers)
63. Marble Madness Machine
64. TaitoTronics Phoenix Machine (will consider $ offers)
65. JVL ELcipse iTouch 10 megatouch countertop machine (will consider $ offers)
66. Multi-Taito board (This is the original one that you can swap sd cards on, not the newly released one with the problems)(SOLD)
********** ITEMS I NEED ****** ITEMS I NEED ********* ITEMS I NEED *********
1. Reactor cabinet empty or project machine
2. Super Bagman machine, PCB, Marquee, Sideart
3. Bagman nice control panel or nice plexi control panel overlay
4. Qbert NOS sideart
5. Juno First machine, control panel, control panel overlay, bezel
6. Qbert Qubes machine / project, control panel, cpo, bezel, sideart
7. Qbert nice original or repro glass bezel
8. A nice Atari Assault machine or cabinet (doesn't have to work, but looking for the cabinet to be in good shape), sideart,
9. ZVG Zektor's Vector Generator
10. Mad Planets machine in good condition, bezel
11. Whirlwind Pinball (new fan topper)
12. Taito Cabinet (Tan colored one that the Tin Star came in or Brown colored like the one Elevator action came in)
13. Mikes Arcade 2 in 1 Jamma Adapter
14. Arcade Flyers (Asteroids Deluxe, Defender, Gyruss, Joust, Mario Bros, Zeke's Peak, Juno First, Bagman, Super Bagman, Qbert Qubes, Taitotronics Phoenix)
15. Vision Pro 19" monitor chassis
16. Multi-Williams control panel, cpo, bezel
17. 60 in 1 pcb (would just like to trade something for one, not a priorty)
18. Berzerk Machine or Cabinet in very good condition (doesn't have to work)
19. Zeke's Peak Control Panel Overlay, Sideart
20. Space Duel Cabinet in great condition doesn't have to work or be complete
21. System I working main board to be able to play Marble Madness
22. Sega Naomi Gd Rom
23. Track & Field Sideart
24. Vision Pro MTG-1901cn Chassis
25. Mortal Kombat II control panel & full sideart for a dedicated cabinet
Last edited:
