FS Parts: 50 Complete Monitors, 50 Repaired Chassis’ Lot (Wichita, KS)

Funny you should say that. My 15year just asked me to do the same for my ride. Lol

Put me down for 1 Shelby GT350R for 22k please. Please detune it from 850HP to 155HP. Its for my daughter's first car.
 

Attachments

  • Screenshot_20210728-155408_Gallery.jpg
    Screenshot_20210728-155408_Gallery.jpg
    289.9 KB · Views: 20
I know... She's the last of 4 we have. I told the 900hp ZL1 is off limits for her first car. Lol
I am sending my oldest of 5 to the BMW professional driving school in Thermal, CA. She is asking a M car as her first..... I said learn to drive and impress me, and you can have performance. But... not until then.

900HP ZL1, Hennessey time! Crazy those are in the 2.XX range and the damn Teslas are -1.999999999. Not my bag (the wife has one) but impressive.
 
Buyer came by today and picked up 34 of the 51 monitors. All 20 of the 19s and all 14 of the 25s are gone. He also grabbed 10 loose chassis.' Everything left is still available. All rebuilt, tested, reflowed, etc unless otherwise specified. All 27" monitors are $300 each. Loose chassis' are individually priced as shown including shipping. Here's the list...

Complete monitors...

-) 27" Kortek 2914F (Tri-res - working but needs rebuilt)
-) 27" Neotec NT-2701
-) 27" Neotec NT-2701
-) 27" Neotec NT-2701
-) 27" K7000
-) 27" D9200 (but I need to keep that for working on D9200s - might sell if the right offer comes along)
-) 27" K7500
-) 27" K7500
-) 27" Makvision (VGA Only)
-) 27" Neotec 500DX (Tri-res)
-) 27" Neotec 500DX (Tri-res)
-) 27" Sanwa PM1745 (27Z21C)
-) 27" Sanwa PM1745 (27Z21C)
-) 27" K7400
-) 27" U5000
-) 13" Tatung Megatouch/Poker ($150)
-) 13" Tatung Megatouch/Poker ($150)

Loose Chassis'

-) 25" Hantarex Polo (x5) ($250)
-) 25" Neotec NT-2500S (standard res) ($250)
-) 27" Neotec NT-2702 (x2) (one of them is missing the VGA cable) ($250/$225)
-) 27" Neotec NT-27E (medium res) ($250)
-) 27" Neotec NT-2701 (x2) (medium res) ($250)
-) 27" Neotec NT-2700 (standard res) ($250)
-) 27" Sanwa PM1745 (27Z21C) ($250)
-) 19" Kortek KTN-2001 ($225)
-) 27" D9200 (x3) (Two of them are fully working but need capped and reflowed, never got around to it) ($350/$275/$275)
-) 25" K5500 ($250)
-) 25" Hantarex MTC-9110 (x2) ($250)
-) 25" Kortek KTM-F (medium res) ($250)
-) 25" (unknown) K7000 clone ($250)
-) 25" K7000A (x2) ($250)
-) 25" Universal Chassis (good quality one from years back) ($175)
-) 25/27" U2000 (x2) ($250)
-) 25/27" K7500 (x3) ($250) (two are tentatively sold)
-) 25/27" K7400 ($250)
 

Attachments

  • IMG_4383.JPG
    IMG_4383.JPG
    744.5 KB · Views: 29
  • IMG_4384.JPG
    IMG_4384.JPG
    886.6 KB · Views: 30
  • IMG_4385.JPG
    IMG_4385.JPG
    709.1 KB · Views: 26
  • IMG_4386.JPG
    IMG_4386.JPG
    813.9 KB · Views: 25
  • IMG_4389.JPG
    IMG_4389.JPG
    397.5 KB · Views: 22
  • IMG_4390.JPG
    IMG_4390.JPG
    580.5 KB · Views: 20
  • IMG_4391.JPG
    IMG_4391.JPG
    414.9 KB · Views: 19
  • IMG_4393.JPG
    IMG_4393.JPG
    537.8 KB · Views: 21
  • IMG_4394.JPG
    IMG_4394.JPG
    511.7 KB · Views: 29
.
 

Attachments

  • IMG_4400.JPG
    IMG_4400.JPG
    728.2 KB · Views: 16
  • IMG_4401.JPG
    IMG_4401.JPG
    665.9 KB · Views: 13
  • IMG_4402.JPG
    IMG_4402.JPG
    795.3 KB · Views: 12
  • IMG_4403.JPG
    IMG_4403.JPG
    761.7 KB · Views: 12
  • IMG_4404.JPG
    IMG_4404.JPG
    631.7 KB · Views: 12
  • IMG_4405.JPG
    IMG_4405.JPG
    694 KB · Views: 12
  • IMG_4406.JPG
    IMG_4406.JPG
    821.7 KB · Views: 14
  • IMG_4407.JPG
    IMG_4407.JPG
    875 KB · Views: 18
.
 

Attachments

  • IMG_4408.JPG
    IMG_4408.JPG
    872.8 KB · Views: 14
  • IMG_4409.JPG
    IMG_4409.JPG
    865.2 KB · Views: 14
  • IMG_4410.JPG
    IMG_4410.JPG
    765.1 KB · Views: 12
  • IMG_4411.JPG
    IMG_4411.JPG
    749.4 KB · Views: 14
  • IMG_4412.JPG
    IMG_4412.JPG
    675.7 KB · Views: 11
  • IMG_4413.JPG
    IMG_4413.JPG
    506.2 KB · Views: 12
  • IMG_4414.JPG
    IMG_4414.JPG
    429.6 KB · Views: 16
Back
Top Bottom