4 Board DK Problems

thefader

New member
Joined
Jun 21, 2010
Messages
953
Reaction score
1
Location
South Dakota
OK, I got the new power supply in I noticed the DK Caberet, but there are few problems.

1. I cant get the screen to sync properly. Where do I start here?
2. The top half of the screen is much brighter than the bottom half.
3. Some of the moving barrels and ect. have colors that bleed across the rest of the screen.
4. The jump sound and walk sounds do not play. (4 Board stack)

Thanks for help with any of these.

I know I probably need a cap kit / flyback, but is there anything else I can do in the mean time?
 
1. H Hold VR451
2. Cap kit
3. Cap kit
4. Verify red and white wires plugged into speaker, and brown wire connected to sound board on 4 board stack.
 
Haha.. I havent been playing. I just now got moved into my new place. I got my Red DK in my game room, and will have the DK Caberet in the living room and start practicing again.
398300 is still my top from last year.

Have you cracked your HS yet?
 
Haha.. I havent been playing. I just now got moved into my new place. I got my Red DK in my game room, and will have the DK Caberet in the living room and start practicing again.
398300 is still my top from last year.

Have you cracked your HS yet?

I did. I'm at 536,700 but I haven't been playing much in the last several months because I got Mario Bros up and running. I'm pretty addicted to that now. I eventually want to hit the kill screen but I'm still a ways off.
 
Very nice score. I have a feeling I can beat 500k... but I get super frustrated and dont play again for a long time after I hit 250,000 without dying then blow 3 guys on one screen.
 
Very nice score. I have a feeling I can beat 500k... but I get super frustrated and dont play again for a long time after I hit 250,000 without dying then blow 3 guys on one screen.

I know right. Yeah, if you're that close to 500k I'm sure it's just a matter of time.
 
Here is what was in place of the sound board. I need an original Nintendo Sound board, and to know which wires go where. Are the original plugs available for this, as those were torn off whenever this thing was installed?
 

Attachments

  • dk board.jpg
    dk board.jpg
    63 KB · Views: 15
  • dkboard2.jpg
    dkboard2.jpg
    52.8 KB · Views: 16
Here is what was in place of the sound board. I need an original Nintendo Sound board, and to know which wires go where. Are the original plugs available for this, as those were torn off whenever this thing was installed?

That looks like a home brew audio amp. :(
 
Back
Top Bottom