3x sharp 10" lcds

BrokeJoker

New member
Joined
Sep 9, 2009
Messages
165
Reaction score
0
Location
Minnesota
Rating - 100%
2   0   0
i picked these up from donnyjj2005 but being the touchscreens seem to DOA im done dealing with them and just want them gone. Being sold as LCDs not touchscreens.might get lucky and get them to work, who knows....
anyways i got just under $70 into these, Make offer, trades welcome.
Theyd make pretty cool countertop displays
info on them here:
http://forums.arcade-museum.com/showthread.php?t=103306
 
im not lookin to see all i have into them back, be nice to see atleast half at the very least.
i am startin my firste mame build so i could use parts to get that goin or whatever else you may have to offer up
 
Do the screens you have actually have the touch screens? The manufacturer says the touch screens on the VAMP-LT were optional.
 
Do the screens you have actually have the touch screens? The manufacturer says the touch screens on the VAMP-LT were optional.
Riptor purchased quite a few of them from Donny as well and they all have touch screen controllers on them.
So I wouldn't be surprised if Brokejoker's had touch screen controllers too.
 
I really want to get one of the touch screens working, but don't need one after that happens. :) Just want something to hack on I guess.

Did anyone identify the model of the Lucas Deeco touch controller board?
 
Newarcades will be getting the Driver disk in a day or so. Hes going to make copies and send them out to fellow klovers.

Joker, contact me. If your unhappy with what you have pm me. Ill work something out with you if you dont sell them. Its going to be a touch sell though, i think i sold 50 of these things ,and still have 50 left....lol. Im a easy guy to get along with

These are touch screens tough, were just having a problem getting the right driver disk. All screens sent out had the touch control board with them. The set up i have fired these things up as touch screens, in 2 mins...I could test them and all
 
yeah the controllers and what not are there and like donny was sayin theres a driver issue goin on with them to getem to work...
donny, if you want to pmme with your thoughts thats cool :)
 
yeah the controllers and what not are there and like donny was sayin theres a driver issue goin on with them to getem to work...
donny, if you want to pmme with your thoughts thats cool :)

Did anyone figure out what speed the serial port was set too on these? The speed was configurable on a number of the touchscreen controllers. Also some of the controllers show limitations that the driver expects COM1 or COM2, etc. Figuring which controller it was would be a huge step to getting the drivers working.
 
Did anyone figure out what speed the serial port was set too on these? The speed was configurable on a number of the touchscreen controllers. Also some of the controllers show limitations that the driver expects COM1 or COM2, etc. Figuring which controller it was would be a huge step to getting the drivers working.


LUCUS DEECO IR TOUCH 41X30
PCB 11080 Rev B

PL-15440 Rev A
 
Here is a copy of the driver disk.
 

Attachments

  • Deeco IR Touch Drivers.zip
    31.4 KB · Views: 3
Back
Top Bottom