3rd run of Nintendo harnesses coming in November

Dokert

Well-known member
Joined
Jun 3, 2007
Messages
12,751
Reaction score
141
Location
Arlington, Washington
Rating - 100%
85   0   0
Our 3rd run of Nintendo harnesses will be coming out in November. We will have a limited run of the following...

Uprights Only

1. 20 DK series (DK, DKjr, DK3) (will NOT work with 4-board DK sets)
2. 10 Mario Bros
3. 10 Popeye

Please keep in mind that I have over 450 pm's in my box, and it will be hard for me to go through and search out the people who have said they are interested in one of these harnesses. My email is pretty full too. Please post your interest here, so that we can find it a little bit easier.

The price is going to be $75 shipped (lower 48)

What do you get for that kind of money?

1. Main harness
2. Control Panel harness
3. Rainbow cable (only for boardsets that require it)

We have had too many people come back to us needing a control panel harness after installing the new main harness. We have determined that this is the best solution to fix this problem.
.
 
PC10 Harness? VS Harness? =)

Nintendo RULES!

Our 3rd run of Nintendo harnesses will be coming out in November. We will have a limited run of the following...

Uprights Only

1. 20 DK series (DK, DKjr, DK3) (will NOT work with 4-board DK sets)
2. 10 Mario Bros
3. 10 Popeye

Please keep in mind that I have over 450 pm's in my box, and it will be hard for me to go through and search out the people who have said they are interested in one of these harnesses. My email is pretty full too. Please post your interest here, so that we can find it a little bit easier.

The price is going to be $75 shipped (lower 48)

What do you get for that kind of money?

1. Main harness
2. Control Panel harness
3. Rainbow cable (only for boardsets that require it)

We have had too many people come back to us needing a control panel harness after installing the new main harness. We have determined that this is the best solution to fix this problem.
.
 
hey, I'm not trying to start an argument or tell you how to do your business, but I am curious, why not just make one standard harness that plays all 5 games?

how much different is a dk harness from popeye or a mario bros? the edge connector harness that was in my former popeye cocktail played all five games flawlessly. It would seem a bit simpler to just make one harness that works with everything.
 
hey, I'm not trying to start an argument or tell you how to do your business, but I am curious, why not just make one standard harness that plays all 5 games?

how much different is a dk harness from popeye or a mario bros? the edge connector harness that was in my former popeye cocktail played all five games flawlessly. It would seem a bit simpler to just make one harness that works with everything.

Valid question / point. We were planning on doing just that, but the problem is the different power supplies. The PP900 only puts out +5vdc IIRC.

If someone is running either a PP7A or PP7B, this can be done very easily.

We may pull the 10 Mario Bros harnesses, and put out a Super harness capable of playing all 5 games providing either a PP7A or PP7B is used. The additional wiring for the Mario Bros control panel will be added to the control panel harness.
 
hey, I'm not trying to start an argument or tell you how to do your business, but I am curious, why not just make one standard harness that plays all 5 games?

how much different is a dk harness from popeye or a mario bros? the edge connector harness that was in my former popeye cocktail played all five games flawlessly. It would seem a bit simpler to just make one harness that works with everything.

Popeye should work fine with the cp harness. I will find out this weekend for sure. Mario Bros is different. The control panel populates different locations on the edge connector and has a different layout for the control panel. The Mario Bros board would power up with the popeye harness fine but it wouldn't be playable with the same harness.- Barry
 
Last edited:
Please count me in for one DKjr complete wiring harness
Thanks for taking the time to do these it makes alot of our lives easier!
 
Popeye should work fine with the cp harness. I will find out this weekend for sure. Mario Bros is different. The control panel populates different locations on the edge connector and has a different layout for the control panel. The Mario Bros board would power up with the popeye harness fine but it wouldn't be playable with the same harness.- Barry

I am a betting man, and I will wager a soda (to keep it simple) that we can get all 5 games into one harness without any major issues.:)
 
I am a betting man, and I will wager a soda (to keep it simple) that we can get all 5 games into one harness without any major issues.:)

Oh I've figured this out already. I'll know for sure this weekend. I'd be more than happy to buy you a soda.............................. :)
 
Are these the harnesses that will let you run DK and DK JR boards in the same cab?

Yes and no. You could plug a DK or a DKJr pcb into the same cab, just not at the same time. A switcher is not available at this time. I have seen some people modify a jamma switcher to work.

You could mount both a DK and a DKJr boardset next to eachother in the cab and just move the edge connector from one to the other to switch games. - Barry
 
Back
Top Bottom