WindDrake
Well-known member
Hey fellas.
Been away from the hobby for a few months, as my house ended up damaged in the Chicagoland flooding over the summer. Arcade ended up with ~16in of water in it.
To keep busy, I've been brushing up my 3D Design skills, as I've picked up two 3D printers over the last year and a half or so.
Takes any coin up to 32mm diameter, 3mm thick. These are designed to ape the fit of a tan CA mech, and have nearly identical drop speed.
In PLA at 30% infill, these should only cost around $1.25 worth of filament.
Files are available here: https://www.thingiverse.com/thing:2740435
I included the Sketchup drawing, in case anyone wants to modify it or do whatever.
Enjoy!
Been away from the hobby for a few months, as my house ended up damaged in the Chicagoland flooding over the summer. Arcade ended up with ~16in of water in it.
To keep busy, I've been brushing up my 3D Design skills, as I've picked up two 3D printers over the last year and a half or so.
Takes any coin up to 32mm diameter, 3mm thick. These are designed to ape the fit of a tan CA mech, and have nearly identical drop speed.
In PLA at 30% infill, these should only cost around $1.25 worth of filament.
Files are available here: https://www.thingiverse.com/thing:2740435
I included the Sketchup drawing, in case anyone wants to modify it or do whatever.
Enjoy!
Last edited:
