3/4" Flat textured T-Molding?

[KaBoom1701]

Does anyone make this?

I see there was a run of flat smooth t-molding done here:

https://forums.arcade-museum.com/threads/pre-order-flat-atari-t-molding-reproductions.458336/#post-4051282

Can't seem to find any anywhere? Does it exist?

 

[TSB]

This is pretty close, once tapped into place...

3/4" Black Leather T-Molding (Leather Texture)

This 3/4in Black Leather t-molding is priced per foot, and sells in 20ft or 250ft coils.

www.t-molding.com

 

[KaBoom1701]

Just noticed the original on m6 Spy Hunter cab seems flat. Not rounded like a Ms Pac Man or Galaga style cab.

 

[TSB]

The flatness is within (non-ocd) tolerances. You can have them send you a sample, if you'd like to compare. (free)

I put a section next to the OG Atari flat, for comparison. That terrible cut line was done by an Atari employee, btw. My cut line is 100%

 

[jawhn]

That terrible cut line was done by an Atari employee, btw.

In their defense, they were quite high all the time.

 

[TSB]

In their defense, they were quite high all the time.

That, and these were mass-produced... and it was in the back (or under, in some cases) of the cab.

 

[KaBoom1701]

Ok. Thx @TSB

Let me check that textured molding out.

 

[KaBoom1701]

Just for follow up on this. I found the perfect match to the OEM flat textured t-moulding for Midway cabinets. I used this on my Spy Hunter cockpit and it turned out great.

Www.outwater.com

 

[jawhn]

I love outwater. They're local to me so I can buy stuff cheap and not pay shipping. They also have a location in Jersey.