2nd Run of DK Series Harness to ship April 1

Dokert

Well-known member
Joined
Jun 3, 2007
Messages
12,751
Reaction score
141
Location
Arlington, Washington
Rating - 100%
85   0   0
This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking payments now. They will ship April 1st, "No Fooling". This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia. The CP harness is available for an additional $10.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

Here is the Official List that I currently have...
1. BlackMatrix (PD) Serial #021
2. GregR
3. StrainedSky
5. Jphillip5
7. Gonzo22 (PD) B+ (PD)
8. Spyridon (PD) CP Harness (PD)
9. Cmgtguy (2)
10. Eric98375 (PD) CP Harness (PD)
11. Sweetaction (2)
12. Evilreny
13. Chefgon
14. Smello (PD) CP Harness (PD)
15. Mrwaffles (PD) CP Harness (PD)
16. P1899m (PD)
17. Taco
18. Troynewman + CP Harness

Please note that there are only 3 left unspoken for at this time. The 3rd run of these will NOT happen for roughly 3 months or so.

Dave
 
Last edited:
Okay I hobviously have no clue but please humor me. So, let's say I have dedicated DK. I buy this harness, shlap it in my machine (solder to the coin doors, etc.), and now I can swap in a DK Jr. Board or a DK3 Board without doing anything but plugging in the different boards?
 
Okay I hobviously have no clue but please humor me. So, let's say I have dedicated DK. I buy this harness, shlap it in my machine (solder to the coin doors, etc.), and now I can swap in a DK Jr. Board or a DK3 Board without doing anything but plugging in the different boards?

yes thats correct! i have this harness and its worth every penny! its the best looking/maid harness that i have in any of my cabs
 
Okay I hobviously have no clue but please humor me. So, let's say I have dedicated DK. I buy this harness, shlap it in my machine (solder to the coin doors, etc.), and now I can swap in a DK Jr. Board or a DK3 Board without doing anything but plugging in the different boards?

As long as you have the rainbow cable connecting the pcb to the video board. You could actually bracket all 3 pcb's in a row in your cab and just transfer the edge connector when you want to change games. - Barry
 
its the best looking/maid harness

images
 
This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking payments now. They will ship April 1st, "No Fooling". This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia. The CP harness is available for an additional $10.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

Here is the Official List that I currently have...
1. BlackMatrix (PD) Serial #021
2. GregR (PD)
3. StrainedSky
5. Jphillip5 (PD) CP Harness (PD)
7. Gonzo22 (PD) B+ (PD)
8. Spyridon (PD) CP Harness (PD)
9. Cmgtguy (2)
10. Eric98375 (PD) CP Harness (PD)
11. Sweetaction (2)
12. Evilreny
13. Chefgon
14. Smello (PD) CP Harness (PD)
15. Mrwaffles (PD) CP Harness (PD)
16. P1899m (PD)
17. Taco
18. Troynewman (PD) CP Harness (PD)

Please note that there are only 3 left unspoken for at this time. Please note that we only have 2 more CP Harness' available for this entire run left. The 3rd run of these will NOT happen for roughly 3 months or so.

Dave
 
Last edited:
Just an update. The second run has passed testing and is almost ready. All paid orders will be shipping by April 1st. - Barry
 
Dave just so you don't forget, when you do a 3rd run let me know I need two made for a Mario Bros and 1 made for a Popeye. Please email me your payment information again at our email, [email protected]

thanks
 
Dave just so you don't forget, when you do a 3rd run let me know I need two made for a Mario Bros and 1 made for a Popeye. Please email me your payment information again at our email, [email protected]

thanks

Currently we do NOT have any plans or time frame for making Mario Bros or Popeye wiring harness'.
 
Get your payments in, as these WILL ship April 1st. All unsold harness' will be put up on eBay on April 2nd at a slightly higher price to cover the eBay fees.

This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking payments now. They will ship April 1st, "No Fooling". This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia. The CP harness is available for an additional $10.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

Here is the Official List that I currently have...
1. BlackMatrix (PD) Serial #021
2. GregR (PD)
3. StrainedSky
5. Jphillip5 (PD) CP Harness (PD)
7. Gonzo22 (PD) B+ (PD)
8. Spyridon (PD) CP Harness (PD)
9. Cmgtguy (2) + 2 CP Harness
10. Eric98375 (PD) CP Harness (PD)
11. Sweetaction (2)
12. Evilreny
13. Chefgon (PD)
14. Smello (PD) CP Harness (PD)
15. Mrwaffles (PD) CP Harness (PD)
16. P1899m (PD)
17. Taco
18. Troynewman (PD) CP Harness (PD)

Please note that there are only 3 left unspoken for at this time. Please note that all of the CP Harness' available for this entire run are now sold out. The 3rd run of these will NOT happen for roughly 3 months or so.

Dave
 
Last edited:
All unsold harness' will be put up on eBay on April 2nd at a slightly higher price to cover the eBay fees.

This repro harness will have an edge connector and work in DK, DKjr and DK3. (with the additional cp harness) These will only work with the 2 board set, and will NOT work with the 4 board set. These are also only for UR's, and will NOT work in CT's.

We are taking payments now. They will ship April 1st, "No Fooling". This will be a limited run of only 20 Harness' in total. They will come with the Rainbow cable, as you will need it.

The cost of the Dokert / Flagg DK Series Repro Harness is $55 shipped in the U.S. and $62.50 shipped to Canada, UK or Australia. The CP harness is available for an additional $10.

Please make sure that I have the following:
1. Your address
2. Your KLOV alias with your name
3. An email address to send tracking info to

My paypal is [email protected]

Here is the Official List that I currently have...
1. BlackMatrix (PD) Serial #021 shipped
2. GregR (PD) shipped
3. StrainedSky
5. Jphillip5 (PD) CP Harness (PD) shipped
7. Gonzo22 (PD) B+ (PD) shipped
8. Spyridon (PD) CP Harness (PD) shipped
9. Cmgtguy (2)(PD) + (2)(PD) CP Harness shipped
10. Eric98375 (PD) CP Harness (PD) shipped
11. Sweetaction (2)
12. Evilreny (PD) shipped
13. Chefgon (PD) shipped
14. Smello (PD) CP Harness (PD) shipped
15. Mrwaffles (PD) CP Harness (PD) shipped
16. P1899m (PD) shipped
17. Taco
18. Troynewman (PD) CP Harness (PD) shipped

We have 2 Harness' left and 4 pending payment. Please note that all of the CP Harness' available for this entire run are now sold out. The 3rd run of these will NOT happen for roughly 3 months or so.

Dave
 
I got my harness and B+ tool in the mail today, you guys really out did your selves with this harness.

The quality is awesome, a real shame you don't see workmanship like this in other things anymore.

If there are any left and you were thinking about buying one, you wont regret it.

Dokert, Flagg thanks for the awesome harness, tool, and starburst that I ate while typing this.
 
Back
Top Bottom