27 inch cga/vga monitor

dandydan1959

New member
Joined
Jan 27, 2010
Messages
175
Reaction score
0
Location
Ohio
Rating - 100%
4   0   0
Hi,
Looking for a 27 inch cga/vga monitor. I am also looking for a 29 inch monitor chassis in the same frequency range.

Would prefer something close to Columbus Ohio on the complete monitor. Shipping would work on the others.

Thanks
Dan
 
27-29 the same

Hi,
Looking for a 27 inch cga/vga monitor. I am also looking for a 29 inch monitor chassis in the same frequency range.

Would prefer something close to Columbus Ohio on the complete monitor. Shipping would work on the others.

Thanks
Dan

You know that 27 and 29 are the same tube right just different countries measure differently. You are looking for a 68# tube right?
 
27 -29 same

Hi,

I am not sure what a 68# tube is but I have a samsung A68kvl74x02 tube. Looking for a chassis that will replace the Korian KME2935 I have on it.

Let me know if you have a vga chassis that will work or let me kn ow which chasis will work on that tube. Tube is only 12 years old so I haope the chassis will fix it.
Thanks
Dan
 
some more information

Hi,

I am not sure what a 68# tube is but I have a samsung A68kvl74x02 tube. Looking for a chassis that will replace the Korian KME2935 I have on it.

Let me know if you have a vga chassis that will work or let me kn ow which chasis will work on that tube. Tube is only 12 years old so I haope the chassis will fix it.
Thanks
Dan

the 68# I was referring too is the first numeric s in the A68kvl74x02 number, which in America we refer to as a 27" other countries refer to them as 29". I was just trying to let you know they are the same as you were saying you need both. As far as a chassis that would run on that tube the answer is most of them, the difference you need to be concerned with is the yoke they are widely different and if you don't have the correct one will never get a good picture. You usually can just simply measure the ohms on the yoke to tell if they are compatible however since you are looking for higher res yokes are even more specific to the chassis and not alot is known here anyway about them the winding on the higher res yokes are somehow much different then on standard res. What do you use these for do you have to have the dual sync?
 
Thanks for the reply

Hi,
thanks for the information on tube size. Can you give me advise on the kind of chassis that would work? I would like a good Medium res VGA chassis. I was confused on the frequency. VGA is what I am looking for.


Thanks
Dan
 
Back
Top Bottom