25k7193 no vertical deflection

dmbj

Active member
Joined
Jun 6, 2005
Messages
1,423
Reaction score
4
Location
Ohio
After a cap kit and i reinstall the chassis i have nothing but a white line across the screen

can anyone tell me the ic/transistor is the vertical deflection output on this monitor?
 
And you remembered to plug the yoke back in?

Yes but i double checked it.

I just ordered 2 LA7823 ic's from bob roberts. That should get me up and running again.

Thanks Oryk
 
IC3 is the vertical output. You must order the number that's stamped on the IC that's in there now. There were FOUR different IC's they used during the production run of this monitor.

Be sure to order the number that is presently installed on your particular monitor chassis. Might need a magnifying glass to read the numbers.
 
Well that sucks I already ordered and paid for the other 2. OK I'll go see what ic3 is on this board. thanks ken
 
you have desoldered, checked and resoldered r101 and the other large resistors in that area right?

just sayin,. most of the time its a ez fix on these k7000s... especually if you breathed on it and now itw got new issues,..
 
Back
Top Bottom