SpartyMAC Active member VAPS Joined Nov 15, 2007 Messages 1,280 Reaction score 16 Location Farmington Hills, Michigan Aug 17, 2009 #1 Does anyone know if I can use a WG-K7000 chassis on a 25" Hantarex monitor tube. The old tube that the chassis was on was also a 25" tube.
Does anyone know if I can use a WG-K7000 chassis on a 25" Hantarex monitor tube. The old tube that the chassis was on was also a 25" tube.
modessitt Volunteer: Encyclopedia Submission Moderator VAPS Joined Mar 22, 2007 Messages 33,414 Reaction score 325 Location Austin, Texas Aug 17, 2009 #2 If the tube neck is the same size and has the same number of pins (try plugging the neckboard onto it), then the tube will work. However, you'd need to swap the Hantarex yoke for the proper yoke for your WG chassis....
If the tube neck is the same size and has the same number of pins (try plugging the neckboard onto it), then the tube will work. However, you'd need to swap the Hantarex yoke for the proper yoke for your WG chassis....
Space_cowboy New member VAPS Joined Mar 29, 2003 Messages 3,537 Reaction score 2 Location Calgary, AB, Canada Aug 17, 2009 #3 tubes over 25" are 10 pin, you will have to swap the yoke over tho
KenLayton In Memoriam Joined Dec 14, 2003 Messages 20,220 Reaction score 712 Location Olympia, Washington Aug 17, 2009 #4 On many Hantarex 25" tubes, they bonded (glued) the yoke in place. That sucker is on there but good.