brzezicki
Well-known member
24U universal* 24 pin EPROM adapters 8 for $20 shipped to USA
Hello as some of you know I designed an adapter board that I use that allows me to replace any 24 pin EPROM* (except TMS 2532) with a 27512 or 27256 which allows me to stock only one type of EPROM for basically all the 80s game boards.
Normally I sell these on etsy.com or ebay for 4 pieces for $20 not including shipping
I normally order them super thin (.8mm rather than 1.6mm) but a while ago I screwed up and ordered 1.6. The reason I order them as .8mm is because to save money I put 2 unit per "fabricated board" which saves me money on fabrication since I only do small runs.
at that thickness (.8mm) they are easy to cut but at 1.6 it takes a few minutes with a small hacksaw or coping saw to cut into.
anyway I've got 29 sets of 2 adapters in this thick format and I hate cutting them so I have decided to offer them as just bare adapters, (no pins, no sockets) for 8 total pieces (4 boards of 2 piece) for $20 shipped to the USA.
or buy all 29 boards (58 total adapters) for $100.00 shipped and I'll throw in a small 3D printed "holder" that I use to hold them and guide the coping saw.
PM me if your interested.
everything is now sold, thanks
Normally I sell these on etsy.com or ebay for 4 pieces for $20 not including shipping
I normally order them super thin (.8mm rather than 1.6mm) but a while ago I screwed up and ordered 1.6. The reason I order them as .8mm is because to save money I put 2 unit per "fabricated board" which saves me money on fabrication since I only do small runs.
at that thickness (.8mm) they are easy to cut but at 1.6 it takes a few minutes with a small hacksaw or coping saw to cut into.
anyway I've got 29 sets of 2 adapters in this thick format and I hate cutting them so I have decided to offer them as just bare adapters, (no pins, no sockets) for 8 total pieces (4 boards of 2 piece) for $20 shipped to the USA.
or buy all 29 boards (58 total adapters) for $100.00 shipped and I'll throw in a small 3D printed "holder" that I use to hold them and guide the coping saw.
PM me if your interested.
everything is now sold, thanks
Attachments
Last edited:
