FS Parts: 22 years later->unearthed. For first time ZENITH K7000 SCHEMATIC-manual $2.75 shipped

arcadecup

Well-known member
Joined
Oct 3, 2006
Messages
2,847
Reaction score
231
Rating - 100%
100   0   0
22 years later->unearthed. For first time ZENITH K7000 SCHEMATIC-manual $2.75 shipped

lost and found 22 year later.
ZENITH model schematic manual of the k7000 A.
NOS brand new original oct-1990 print on card stock paper. 6 pages
As far as we all know this was nonexistent until now!.
has pinout - drawing of flyback!. possible way to now sub in a k7000 flyback or hr cross!?

PayPal $2.75 [email protected] or do a self checkout on my website.
i suggest picking up the nos 19V2000 service manual ($5.00) too if you're going to pickup one of these.
click the Boards/Semiconductors/Kits/Misc tab and navigate down to the misc category.

k7zen.jpg

k7000asv.jpg

an5.jpg
 
Last edited by a moderator:
I no longer have a k7000a, but when I did, I spent countless hours trying to track down the schematics for it and always came up empty. I just purchased one of these on your site so I can put one in my stash of manuals in case I ever run into one of these k7000a's again.
Definitely a good find.
 
So these aren't scanning on the internetz?

This is not available anywhere on the internet as far as I know. I searched A LOT back when I was working on the k7000a I had, and no one had any info anywhere on them. I even tried WG, and they didn't have anything on it.

Almost makes me wonder if they even included the manual when the games left the factory like they typically do.
 
I am sure it will too when enough get sold lol..
but for $2.75 you can skip the stress of waiting, searching, clicking "download", "open", "file" "print" and "squint"

plenty to go around right now 100's in stock!. better late than never ha!

I will echo that this manual does not currently exist online. But that's gonna change soon, I'm sure :D
 
Just bought one, I know they'll show up soon in pdf, but I like to support Chad and the fact he is offering up this very rare bit of info for so cheap. If someone can figure out a crossover/replacement flyback, I'll be the first in line to get one!
Thanks Chad
Aaron
 
Just bought one, I know they'll show up soon in pdf, but I like to support Chad and the fact he is offering up this very rare bit of info for so cheap. If someone can figure out a crossover/replacement flyback, I'll be the first in line to get one!
Thanks Chad
Aaron

Absolutely. I picked up one of the V2000 manuals when they turned up as well. But these will sell out and not be available some day, so I want to see them preserved.

I just looked at my Klax manuals —*I knew it came with a monitor manual, but I wasn't sure which one. Turns out it's just the Atari TM-296, but it would have been funny if I was sitting on one of the WG K7000a manuals already.
 
I have about 350 in stock now of the k7000A all original prints from 1990!.. likely the only 370 that ever existed. about 40 of the 19V2000'S

When the time comes for you to scan if you would like to have the .pdf scans merged I have adobe acrobat 9 installed that will do it perfectly. thanks for the business, will and insight to scan to immortalize.

Chad.

Absolutely. I picked up one of the V2000 manuals when they turned up as well. But these will sell out and not be available some day, so I want to see them preserved.

I just looked at my Klax manuals —*I knew it came with a monitor manual, but I wasn't sure which one. Turns out it's just the Atari TM-296, but it would have been funny if I was sitting on one of the WG K7000a manuals already.
 
Last edited by a moderator:
I have about 350 in stock now of the k7000A all original prints from 1990!.. likely the only 370 that ever existed. about 40 of the 19V2000'S

When the time comes for you to scan if you would like to have the .pdf scans merged I have adobe acrobat 9 installed that will do it perfectly. thanks for the business, will and insight to scan to immortalize.

Thank you for finding these and getting them out to people who'll appreciate them. I got mine today, and it's beautiful. I've got all the stuff to get them scanned and merged, but Acrobat might help with file sizes…*Mine always seem to end up giant. If I can't get them down to a reasonable size, I'll send them your way.
 
Just bought one, I know they'll show up soon in pdf, but I like to support Chad and the fact he is offering up this very rare bit of info for so cheap. If someone can figure out a crossover/replacement flyback, I'll be the first in line to get one!
Thanks Chad
Aaron
I have two of these K7000A chassis and would really, really like to see a viable flyback replacement! Hopefully someone far more knowledgeable about K7000/A monitor chassis can get this figured out ASAP.

Thanks for offering these for sale, Chad! If you have already done so Chad, please speak-up! :)

Scott C.
 
about 290 left!!! when they are gone its back to the original prints eternal slumber of never existing :)

didnt explore the flyback replacment options yet.. will do when i actually need to for a customer or if i have spare research time.

k7astack.jpg
 
Save one for me, and add it in with my monitor total! This will be nice to keep for future reference. Looking forward to seeing my refurbed monitor too!

Gar
 
Kinda makes you wonder why people even bother to find stuff like this and sell it for next to no profit only to have people shit on his sale thread and give the thing away.
 
I talked to Chad first, and I sent him a copy to give to folks who bought the paper one, if he wanted. We had nothing but kind words for each other, and as far as I know, we're cool.

But you're right, it is tacky to post this in his FS thread, so I deleted the original post.

$2.75 is an amazing price and Chad is a great guy. Anyone who has one of these monitors should buy the printed manual regardless of the availability of the scan.
 
I don't think it really matters either way. This is such a limited run item, it's not like it's the latest Hunger Games book being 'leaked' to the internet in .pdf. Besides, I'm much happier with my hard copy.
 
I don't think it really matters either way. This is such a limited run item, it's not like it's the latest Hunger Games book being 'leaked' to the internet in .pdf. Besides, I'm much happier with my hard copy.

No shit! Anyone who's going to need this (and knows how to read it).....is gonna want a hard copy. Reading a PDF of a schematic....SUCKS!!! It's better than nothing (barely), but at $2.75.....it's a no brainer.

Edward
 
Back
Top Bottom