FS Game: 20 PCBs: Midnight Resistance, Two Crude Dudes, Tekken 2, Raiden, Gyruss, SFIICE M5, +

M3Patterns

Member
Joined
Apr 26, 2012
Messages
101
Reaction score
0
Location
Arizona
Rating - 100%
19   0   0
20 PCBs: Midnight Resistance, Two Crude Dudes, Tekken 2, Raiden, Gyruss, SFIICE M5, +

Okay, I got a bunch of PCBs here. Working condition is described next to the games. All tested games will be tested once again before being shipped out. All games will be shipped in ESD protective bags and will be packed to survive multiple throws against a wall. :)

As these prices are shipped, you will get a pretty good discount on more than one.

Paypal gift would be nice, but not required.

I may be trying to get some of these completely working, so the price may change if I can get them to be 100% operating.

Here are the games:


Midnight Resistance (Pic) Works 100% SOLD!

Two Crude (Pic) Works 100% $45 shipped

Tekken 2 ver. b (Pic) Works 100% with harness (not sure if complete harness - might be able to gauge with pic) SOLD

Tekken 2 ver. b (Pic) Works with graphical glitching across the whole screen. I think I tried to reseat some stuff, but I can't remember. $25 shipped

World Rally [x2] (PCB1) (PCB2) Both PCBs work 100% $50 shipped each

Gyruss (Pic) Untested due to non jamma, but it does say video works across it. $75 shipped

Heavy Barrel (Front)(Back) Works, but has lines across the sprites. I didn't try reseating the roms. I may be keeping this one, though. $40 shipped

Raiden (Pic) Works with some missing sprite lines. I traced this to a QFD with 4 legs that came unsoldered. 1 was soldered back on (I thought it was just one leg) but 3 others need to be as well, and I haven't had time. It looks like there is may be a broken trace somewhere as well, as sometimes the game won't come on or will stop unexpectedly, but will after a careful flex to the board. However, it may just be that the edge connector is too worn or the roms aren't sitting properly, although I did reseat them. I'll probably keep this as I love Raiden and it should be a somewhat easy fix, hence the price. $70 shipped

Street Fighter II [Probably Bootleg CE - M5] (Pic) Tested - colors on sprites are way off and there is some shakiness to the top of the picture. Found capacitor that was loose. Will be soldering back in. Not quite sure of pricing $Offer

Enduro Racer (Front) (Back) Apparently missing the main boards, this is untested due to it being non jamma. Not quite sure of pricing SOLD!

NBA Jam (Pic) No sound board. I could not get it to work, although I haven't tried reseating the roms yet. $Offer

Beer Frame Bowling (Pic) Almost worked after a few tries - didn't try to reseat roms, although these is some (superficial?) damage to one of the chips. $Offer

Paint 'N Puzzle (Pic) (Pic2) Could not get it to work. $Offer

Slickshot (Pic) Couldn't get to work, didn't try reseating roms. $Offer

Chicken Dash (Pic) Untested. $Offer


I also have this random stuff:

Merrit Pit Boss or Video Poker board (Pic) (Pic2) Untested
Fruit Bonus '96 Special (Pic) Untested
Home Run Classic PCB (Pic) Untested
Random transistor and a heat sink (Pic) Untested


Check out my other post for Playchoice games: http://forums.arcade-museum.com/showthread.php?t=249738

Thanks!
 
Last edited:
Back
Top Bottom