20 EZ issue

frytex

Member
Joined
Mar 25, 2008
Messages
534
Reaction score
1
Location
La Vernia, Texas
ok this seem to be the 20 EZ monitor issue page so I will add one more. Can anyone tell me why this is happening I just recapped this monitor it was having this issue before after capping the same issue. I have adjusted everything but still no luck
 

Attachments

  • monitor issues.jpg
    monitor issues.jpg
    63.5 KB · Views: 24
He should have mentioned that he has this hooked up to a game that works just fine with another Sanyo 20EZ, just in case someone wants him adjusting pots on the game board.

I recommended he check the horizontal hold pot to make sure it's not bad, then to inspect his sync line for cold solder, then to maybe replace his controller IC...
 
I'd also give the caps a quick look over. Someone could have stuck one in backwards before you...and you just followed.

Edward
 
Back
Top Bottom