2 Multiboards with a 2-1 sitcher?

Matt68061

Active member
Joined
May 30, 2016
Messages
344
Reaction score
26
Location
Nebraska
Anyone used a 2-1 switcher with 2 multiboards. Why? You are wondering... Why not? I have a 60-1, 412 in 1, a 520 in 1 and an ArcadeSD... They each have unique games and I would like to be able to just flip a switch and go.

Will be hooked up to a vga monitor. I would be interested in hearing any set ups and experiences.

I really just enjoy playing around with setting things up and learning how to do it....almost more than the games themselves!

Thanks!

Matt
 
You are likely to run into sync issues. But if you can find the sweet spot on your monitor where it will reliably sync up when switching it will work. Although switching to one of the multiboards and waiting for it to boot would be irritating. Unless you have one of the switchers that powers all slots all of the time.
 
Wait...what

The 412 doesnt like the 412. Is this a riddle? (Seriously, not trying to be a smartass but this went over my head)

Thanks Mike... I still am interested in a custom layout...real life kind of trumped this for a bit ��

I think, specifically, what I want to do is have a 520 (or 619) in 1 horizontal board in slot 1 and the new Heroes of the Storm 2 board in the other. That gives me more of the vertical classics ...

Appreciate the advice!
 
Last edited:
Back
Top Bottom