Glad somebody figured it out.....
Do you have any pics that you could post about this?
I bought 3 of these gizmos months ago and now I'm finally getting to trying to make one work. The ones that I got each had the black/red wire connector which is what I'm assuming you hooked the 12v up to. I'm a rookie at this stuff so trying to figure this one out.
I have an older non-switching power supply that is in the machine that I need to connect the 12v wires to. I'm hoping to get some feedback before I go any further - any help is much appreciated.
The other thing I noticed is my pack of (3) 2in1 jamma switchers came with (3) sets of black/red connectors but they only gave me (1) of the black box/phone jack thingies and (1) remote. I read somewhere in these forums that there is only 1 frequency they are set to on the remotes and if you have several cabinets with this setup it will change them all at the same time with one remote - this would obviously not be good!
I wonder if there is a way to hard wire this and avoid the goofy looking remote button?
????
Thanks,
-GackAttack