1XXX in 1 Board and a Spinner

friedfish

Active member
Joined
Apr 10, 2008
Messages
237
Reaction score
27
Location
Newark, California
I purchased a 1XXX in 1 board from someone on the forums, and I made a custom control panel with a trackball and spinner. I bought a turbo twist high low spinner from groovygamegear but I cannot get the spinner to work.

The trackball works and is connected to the 1XXX in 1 board through the spinner interface board via a USB. Does anyone know if the 1XXX in 1 boards are compatible with a spinner?
 
I purchased a 1XXX in 1 board from someone on the forums, and I made a custom control panel with a trackball and spinner. I bought a turbo twist high low spinner from groovygamegear but I cannot get the spinner to work.

The trackball works and is connected to the 1XXX in 1 board through the spinner interface board via a USB. Does anyone know if the 1XXX in 1 boards are compatible with a spinner?

They are. You may need to go into the menu and configre it for it. Assuming you bought it through jammaboards.com ask them, they are extremely helpful in configuring it and dealing with it when it breaks...Which, if you havent already, ghost that hard drive.

For more info/forums, go to www.xxxx-in-1.com
 
Back
Top Bottom