1st cap job, quick question

wildwest3163

Active member
Joined
Sep 17, 2008
Messages
1,538
Reaction score
11
Location
Lake City, Florida
Doing my 1st cap job, got a quick question. Im using a kit from bob roberts for the G07, and have a couple descrepancies. at C905 it currently has a 10uf350, the kit sent a 10uf250, and at C403 it currently has a 100uf16v, bobs kit has a 100uf25v. will these make any difference?
 
the 100uf25v is a fine replacement for the 100uf16v as you can always use a higher voltage rating.

and checking the listing in the GO7 manual, C905 was originally a 10uf250 so Bob does supply the correct one for the replacement.
 
Thanks Guys, I thought so but just wanted to verify that. monitors back up and running, but still takes a minute or so to light up. soon as I can get the colors aligned itll be good:D
 
long warm-up time may indicate a slowly failing tube. might be helped by a rejuv, or you may want to keep an eye out for a replacement.
 
Back
Top Bottom