19v2000 issues

Robotron Jon

Well-known member
Joined
Feb 10, 2008
Messages
10,647
Reaction score
164
Location
California
I have a 19v2000 monitor that was working fine except for HV unit issues which could not be repaired (long story) so I swapped out the HV unit with another one. The second unit has chatter and I have a very dim picture with a bright spot in the middle of the screen. I did not leave it on longer than a few seconds to avoid burn.

Anyone have any ideas?
 
I have a 19v2000 monitor that was working fine except for HV unit issues which could not be repaired (long story) so I swapped out the HV unit with another one. The second unit has chatter and I have a very dim picture with a bright spot in the middle of the screen. I did not leave it on longer than a few seconds to avoid burn.

Anyone have any ideas?

Sounds like you have two dead HV cages. Did you test B+? Pin 1 of P500, should be 90-100vDC. There's and adjustment in the cage if it's off.

PM me if you want to sell one or both, I want some stuff to work through. But I'll have to hear your long story.
 
Back
Top Bottom