19K7915 from an APB, some squishing

FedExin

Well-known member

Donor 2011
Joined
Dec 30, 2007
Messages
2,819
Reaction score
577
Location
Atascadero, California
Hi, I purchased a known working 19K7915 from a member on this board, and installed it in an APB. It fired right up, but looks like it could use some blue, and has a weird squishing effect. I'll post video of it in a min.
 

Attachments

  • 2012-09-15-12.40.58.jpg
    2012-09-15-12.40.58.jpg
    48.4 KB · Views: 9
  • 2012-09-15-12.47.jpg
    2012-09-15-12.47.jpg
    74.7 KB · Views: 14
For the blue, just turn the blue up . For the squish, there's a little pot that's vertical instead of horizontally mounted, and it's just behind where the horizontal center/horizontal hold pots are. It says 50/60hz or something like that, adjust it and it'll move that line out of your way for ya.
 
For the blue, just turn the blue up . For the squish, there's a little pot that's vertical instead of horizontally mounted, and it's just behind where the horizontal center/horizontal hold pots are. It says 50/60hz or something like that, adjust it and it'll move that line out of your way for ya.

Thanks! It was tight in there and I didn't see the an extra pot. I'll take a look!
 
it's there it sticks straight up. instead of being side facing. its location is VR9.

and i would check the +5 on the board if it is resetting on you.

Peace
Buffett
 
Back
Top Bottom