19k6100 whows..

rcoonjr

Member
Joined
Mar 3, 2010
Messages
312
Reaction score
3
Boy its not my day at all.. I can understand if the smoke came yesterday onm friday the 13th.. but today... wow...

Moral of the story. I capped the monitor. double checked everything. The HV cage lets out a nice bellow of smoke. I kill R907 and R901. noticing the cap C902 bubbled. And it was inserted the right way too! I've looked over a 19k6100 troubleshooting guide and everything checks out fine. nothing inserted wrong. I suspect it was too much for this little guy to handle ...And clues to insite me let me know. The monitor chasis did work before I changed anything. The only problem was it was breathing. (which we know is bad caps..)

-Ron
 
Hmmm... how 'bout putting this in the Monitors section? ;)
 
Did you replace R907? It looks pretty black in that photo. Might want to check ZD902, also...
 
I did... I got a kit from Arcadeshop. Installed all the new parts on it. And this is what I got.. Smoke!... Where it worked prior other than the 'breathing screen' which normally indicates caps. And I'm used to donig cap kits.. I do them all the time on G07's and wells gardner chasiss all the time.
 
Back
Top Bottom